Server motherboards -- help me understand differences

-O is standard retail packaging
-F means the board supports IMPI(remote system management independent of the OS)

The only other difference between the three lies in the ethernet chipsets used. The X9SCL-O and the MBD-X9SCL-F-O have one Intel 82579LM controller and one Intel 82574L controller. The X9SCL+-F has two Intel 82574L controllers. I'm not sure what the differences between the two controllers are. Intel ethernet controllers are generally very well supported across multiple OS's, but it would be a good idea to see if there are any compatibility issues specific to your application before purchasing.
 
-O is standard retail packaging
-F means the board supports IMPI(remote system management independent of the OS)

The only other difference between the three lies in the ethernet chipsets used. The X9SCL-O and the MBD-X9SCL-F-O have one Intel 82579LM controller and one Intel 82574L controller. The X9SCL+-F has two Intel 82574L controllers. I'm not sure what the differences between the two controllers are. Intel ethernet controllers are generally very well supported across multiple OS's, but it would be a good idea to see if there are any compatibility issues specific to your application before purchasing.

Thank you -- VERY helpful.
 
The MBD-X9SCL-F-O has a bug where the ethernet ports are reversed on linux. I had one, buy the +-f instead, I believe the X9SCM-F-O is affected as well due to the same nic. The X9SCM is the C204 chipset meaning it has sata 6gbit/sec as well.
 
Back
Top