AVAFREAK182
2[H]4U
- Joined
- Jun 10, 2007
- Messages
- 2,645
I have a K8N-DRE and I am having an issue.
I install 1 CPU in socket 1 (a test chip which is supported by the mobo), and a stick of RAM in slot A2 as the manual specifies.
When I flip on my PSU I get 2 red flashes from the CPU WARNING light and then the power light comes on. All fans spin up, but I get no keyboard flash and no POST.
When I install no CPU the light stays on. Tested with 3 different CPU's so I know its not them.
Any ideas?
I install 1 CPU in socket 1 (a test chip which is supported by the mobo), and a stick of RAM in slot A2 as the manual specifies.
When I flip on my PSU I get 2 red flashes from the CPU WARNING light and then the power light comes on. All fans spin up, but I get no keyboard flash and no POST.
When I install no CPU the light stays on. Tested with 3 different CPU's so I know its not them.
Any ideas?