• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Separating pump from H2O-320 edge or...

G

Genny

Limp Gawd
Joined
Jul 20, 2011
Messages
184
Somewhat lengthy two part question...

1. I unfortunately purchased the Swiftech H2O-320 Edge some time ago rather than just manning up and piecing it out. I got a great deal on it and it came to be about the same price...but hindsight is 20-20, no? In any case, is it possible to separate the pump housing of the MCP35x from the radiator? It's truly a pain in the ass to fill and bleed with the pump so high in the case. Additionally, as strange as it may sound, it would actually be a lot easier to route tubing in an aesthetically pleasing manner without it integrated. (I don't like the look of long runs)

2. I was considering running a second pump in serial as my loop is getting fairly large and my flow rates are not what I would like while maintaining an acceptable level of noise. How much difference does it make to have a reservoir in between the two pumps (again, just for ease of filling and bleeding) rather than straight pump > pump.

Thanks a bunch fellas.


While not the exact model, it's pretty similar:

MCR220%20DRIVE-EXPLODED.jpg
 
You must log in or register to reply here.
Back
Top