Sempron Multi Uncap?

Shava

Gawd
Joined
Jan 23, 2006
Messages
762
Hey, i have modded my sempron to a mobile with an adjustible multiplyer but i can only go to 11x. Is there any way to get around this?
 
I used the socket mod to change the multiplier on my Athlon 2500+ Barton... use the instructions here http://www.ocinside.de/go_e.html?/html/workshop/pinmod/amd_pinmod.html

Just select the socket view, the multiplier you want, and it'll show you which holes to connect. I just took 30gauge copper wire (from 18gauge stranded, just using a single strand) and cut approx 3/8" lengths, bent 'em in half and inserted 'em into the sockets where the website shows.
 
You're stuck unless you really start changing (hacking/modding) the bridges...

BTW

SDx2500DUT3D | PR = 2500+ | ~ 1750 MHz | 10.5 x 166 MHz | 333MHz DDR FSB | Socket-462 (A) | 256KB L2 Cache

How did you pick up the 1/5 multiplier?

MD
 
Back
Top