Second Opinion on a High End rig Please?

cdrdj

n00b
Joined
Sep 21, 2007
Messages
2
I'm kinda new to gaming pc's, usually i'm more into high end editing systems, so i'm not sure if this computer would work or if it will be bottlenecked somewhere. It would be great if someone could suggest some things or maybe say what sucks. I'm making this computer for a hybrid use of HD film editing as well as top tier gaming performance. So if some parts don't make sense, it's probably because it is aimed towards the editing aspect. Thanks a lot!



Main Things:

E6400 core 2 duo 2.13ghz Processor (thinking of getting E6700 instead or is quad core worth it?)

Nvidia NF 680i SLI Motherboard

DDRII PC5300 2GB x 2 Ram

Nvidia 8800 Ultra x2 in Sli (already got this for a really good deal so I can't change this)

550 W EPS 24/8PINS w/ SLI ( I have no idea what this means but i've heard I need at least around 850watts with my setup so I think I should upgrade this? This is my main concern at the moment)



Other Things:

Chenbro PC 61319 MidTower (will this tower be good enough? I would prefer to keep this but if it will absolutely not work, then I can change)
x2 Liteon 20x dvdrw Drives w/ Lt scribe
x3 500Gb WD 7200rpm
Cooler Master 80MM fan
32 inch HD screen (still shopping around, not final yet)
2 Smaller HD screens
 
Get a Q6600 or 6750, drop the PSU and get something better. And the ram you might want to get PC2 6400.
 
The eVGA 122-CK-NF68-A1 or T1 are the best 680i boards at the moment -- fewest compatibility issues, best support. $190-200 for the A1 (lifetime warranty) $170-180 for the T1. Do not get the NF63-TR/AR as these boards have very poor quad support.

Drop your CPU for the Q6600. Get it from NCIXUS.com as this will greatly improve you chances of getting a G0 stepping chip. The Quad will be a /great/ help with the editing and encoding work.

DDR2-800 is ideal with a Quad. 2x2GB sticks are preferable ($225 or so) but you can go 4x1GB for $140 or so if the money is a problem.

You're going to need a third card to drive your secondary displays. It needs to be a Geforce card to prevent major driver related issues. While in SLI mode the Ultras can only drive one display.

Yes you need a different PSU. Something like the Thermaltake Toughpower 850watt or a similarly rated Etasis, Silverstone, Etasis, or Enermax unit.

I hope most of your drives are SATA? Modern motherboards have only one IDE channel (supporting 2 devices) so keep that in mind.
 
Thanks a lot. Your tips really helped out. I just looked at the Q6600 and it seems to only be a bit more than what I was going to get and looks to be so much better.

Good to know about the 3rd card for using 3 screens in Sli mode. Didn't know about that before. So if I bought a third card just for the sake of having a third screen, would it then be okay to just buy a cheap card (something like 256 megs) with dvi connection? Would there be any conflictions with the sli cards or would it work just like any pci device. Insert, install drivers, done. Again, thanks a lot for the help.
 
You can only run one display while in SLI mode from /both/ cards in SLI. The third card would have to drive both other displays. I'd recommend something like an 8500 or 8600 series card due to their HD video decoding hardware to drive the other two displays, and yes, since you won't be gaming on those displays the amount of onboard memory on the third card is a non-issue. Anything 128MB+ should be fine, just make sure it has dual DVI. The third card will show up as a seperate device but has to use the same driver set (hence you want an Nvidia card that uses Forceware, like the Ultras) for compatibility reasons. Yes, you just plug it in, it's detected, you're good to go, so you can add it when and if you get the other two displays.

Apparently clubit.com is an even better source for the Q6600 as they'll guarantee a G0 revision chip (and their prices are better anyway...). If you plan to OC the quad (and why not?) get something like the Thermalright Ultra 120 Extreme heatsink ($55-65 or so) an an S-Flex mid-speed fan ($15). That should get you somewhere between 3.4 and 3.75Ghz. Get the "OEM" version of the Q6600 if you're getting an aftermarket HSF, since you won't be needing the stock one. Also make sure you have a tube of Arctic Silver 5 or MX-2 around.
 
I agree with s-c, but get the retail CPU since it comes with a 3yr warranty as opposed to the OEM's 3 month warranty.

If you need an IDE card, Newegg has its house branded one on sale for $20 - $5 Instant rebate - $5 Promo code (EMC920ROSE01) + shipping.
 
Back
Top