Seasonic 650w PSU - Concerns

Jon855

[H]ard DCOTM January 2008
2FA
Joined
Aug 25, 2005
Messages
12,133
I put this in the DC Sub-Forum because I've just noticed this odd issue and I'm not sure how I would go about testing this out, I've no volt-metering etc, etc... Hope it's a software fess up... And I've done several stress tests without any errors. I'm hoping this is not something I need to be worried about.

I hope it's just the CPUID HW Monitor software that's wrong.

Look at what I outlined...

Seasonic650Issue.jpg
 
check the voltages with speedfan as well and see if they match up.. just install speed fan.. open it.. go to the exotics tab and click show the magic if you dont see a bunch of white squares showing hardware stats..
 
What do the voltages in the Bios show? I'd think if the +12v were really that low, it'd crash the OS with an OC Quad.

If it really IS that low, you run the risk of HD corruption with both voltages being that low as a minimum.
 
Eek :eek: I gotta' go with brother nomad8u's appraisal, if you were dropping as low on your +12v line as 7.19v or so I'd think you would be having all sorts of weird problems. :confused:

Obviously, I could be way "outa' pocket" on my ideer, that maybe the software is reading the voltages wrong. Please do as suggested by brother sirmonkey1985 and see what good ole' SpeedFan reads. Whatever happens to correct the problem please post the solution. "a pair of inquiring brain cells wants to know :D

Folding and WCGing for the CURE

 
I don't know precisely how you're using this system, but I have a 600W Seasonic S12 that stopped working last month. It was folding 24/7 powering two processors and two GPUs so it may have been too much for it when the new more intensive WUs came online. Thought I'd mention it since your PSU is almost the same model. My PSU was purchased in 2005, so it wasn't new by any means.
 
I didn't notice it before, but that's gotta be wrong voltage readings. I seriously doubt a GTX 260 is running without crashing at that low of voltage (on top of an OC B3 Q6600).

If it does turn out to be that low I hope you just bought it and can RMA it.
 
yup thats why i was saying check it with speedfan.. everest isnt that reliable on a lot of things.. i quit trusting it years ago on temps/voltages and it hasnt gotten any better since..
 
Well, well, what do we know now?

SpeedFan 4.37 shows the 12v line to be at 6.81v

And yes, I'm running 6600 OC'd to 3Ghz and I do have a GTX 260 SC...

Something is weird? I'm gonna ask around in the PSU subforum.
 
If the voltages are really that low I find it hard to believe you wouldn't be having a ton of stability problems. But if they really are that low you absolutely need to replace it.
 
If the voltages are really that low I find it hard to believe you wouldn't be having a ton of stability problems. But if they really are that low you absolutely need to replace it.

First of all, I understand the risk that comes with it, but I want to verify this first before I replace anything and well to be honest MicroCenter's about 5 minutes of a drive away from where I am but I don't want to replace it if I don't need to - damn holiday spending...

Thanks, if I do replace it, what should I go for? Store closes in an hour and change.
 
What ever you do, don't go to the PSU forum and mention that your software and bios readings are off. ;)

However I would recommend that you visit the PSU forum and find out how to measure the output of the PSU using a voltmeter. BIOS and software readings are considered suspect at best.
 
Never underestimate the value of a good basic multi meter.

Come to think of it..... I need one.
 
So I'm back from the store and I carried an extra baggage... Sorry for crappy pic - blackberry 8300

IMG00015.jpg


PC&C 750w for 119
Two 1TB HD
Vista Ultimate 64 (my msdnaa's no good anymore and I'll need to reformat down the road)
 
If your PSU was really putting out 7V on the 12V line, it wouldn't be functional. Seasonic PSUs are rock solid, so I would seriously doubt that there's anything wrong with it. Plus, software voltage monitoring is also wholly inaccurate. I suggest you test your rails properly with a multimeter before you consider keeping the new unit (FYI, the Silencer 750 is also built by Seasonic, so it isn't any better than your current PSU; no reason to buy a new one unless this one turns out to be faulty).
 
Oh well, seems that both of my PSU, the old and new are both in its working condition...
So this can only mean...






















































MORE D​
 
right now as I speak, I'm formatting my 75gb raptor for ubuntu (it'll do bonic or something but meh, I need a video card so i can use it)... Within a week or less, I'll have it up and running.
 
So, after fussing with the PC C PSU... It wouldn't do well with the P182 case... the wires are oh my god... the wires... So I've moved the parts and so on forth back into another case...

I'm now having a nice glass of cold beer all in the name of [H]orde
 
Yeah, the Silencer's are quite large. My 610 has the same size case as the 750. Its enormous.
 
Back
Top