• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SE-3016 connector reference

C

cape

n00b
Joined
Apr 6, 2013
Messages
8
Hi,
I'm looking for a description of the connectors on the SE-3016 expander board. I've been searching and reading the threads here, but while there is plenty discussions, I didn't find anyone clearly stating the power pinouts for instance. This post in combination with this image seems to indicate that the power plug (J10, on my board at least) would be 12V on pin 1, 5V on pin 3 and ground on pin 4. Not really keen on guessing though, so I hope someone could verify this?

In the same thread, the serial port is mentioned, but there is no pinout. Also the remaining four ribbon cables, which I presume control LEDs are undocumented.

Would be awesome if there could be a connector reference for modders!
 
Last edited:
There seemed to be quite a lot of interest in the chassis, hasn't anyone picked one apart?
 
You must log in or register to reply here.
Back
Top