Scythe Ninja 1000 INSTALLATION Please Help!!!!!!!!

johnnq

[H]ard|Gawd
Joined
Dec 31, 2005
Messages
1,049
ok i ordered the ninja online and it came with : heatsink, sticky backplate, 2 screws, 939 bracket.


i cleaned off everything. applied ceramique to the ninja with a paper bag. wiped off excess. put a small dot on cpu and put backplate on.


now i'm just stuck. once the screws are in all the way, the ninja is like a few mm too high! so i loosened the screws and plopped on the heatsink...now it doesn't even touch. and the heatpipes are in the way of the screws!!!! the seller also didn't include the cute wrench obviously needed to install the thing.


please help! i pulled out my motherboard and the whole 9 yards and i just want to sit in front of a wall and cry...or punch the wall :(
 

johnnq

[H]ard|Gawd
Joined
Dec 31, 2005
Messages
1,049
ok i found a set of really skinny pliers and somewhat screwed it in...i hope it stays :\
 
Top