• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SATA RAID 10 inquiry

F

Fx02

Limp Gawd
Joined
Apr 19, 2002
Messages
131
I'm in the process of intergrating my lab from a H/W RAID 5 to SATA RAID 10. My question is, what's the intergrity- and so forth...

Does anyone have opnions on adding a additional RAID volume from RAID 5 to RAID 10. Any opinions would be great!
 
Charcteristics
-----------------
Code: 
RAID 10 is implemented as a striped array whose segments are RAID 1 arrays


RAID 10 has the same fault tolerance as RAID level 1


RAID 10 has the same overhead for fault-tolerance as mirroring alone


High I/O rates are achieved by striping RAID 1 segments


Under certain circumstances, RAID 10 array can sustain multiple simultaneous drive failures


Excellent solution for sites that would have otherwise gone with RAID 1 but need some additional performance boost

Disadvantages
-------------------
Code: 
Very expensive / High overhead


All drives must move in parallel to proper track lowering sustained performance


Very limited scalability at a very high inherent cost

Source: http://www.acnc.com/04_01_10.html

You asked for opinions but my Raid knowledge isnt the greatest, so instead I'll steal someone elses.. :D
 
You must log in or register to reply here.
Back
Top