• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

SATA + IDE problems

E

EzEddie

Limp Gawd
Joined
Dec 20, 2002
Messages
388
Anybody running an SATA drive as a master drive and a standard IDE drive as a slave have success?

I have a DFI Lanparty motherboard and it will not boot when I have the IDE drive plugged in. It worked for about a day and now it will not work at all when the IDE is plugged in. I tried all sorts of bios's, settings, and jumper configurations with no success. Any ideas what could be doing this??
 
well, if by master you mean boot drive, it should work. You may have to set it to boot from SCSI in the BIOS. (or SATA-RAID if it's an option) If it's a controller add-in card, it'll definitely be SCSI in the BIOS. (even though technically it's not) You might want to change the first boot device to your hard drive (whatever setting that may end up being) as I've had the best success with it being first.
 
You must log in or register to reply here.
Back
Top