Samsung 840 EVO 250GB Performance

yankees9920

Weaksauce
Joined
Apr 23, 2010
Messages
68
I just got a new Samsung EVO 250GB SSD on cyber monday and just hooked it up and wanted to do some benchmarks. But I am concerned that the performance is much lower than what I was expecting from both their stated speeds and other benchmarks I've looked at. I'm getting around both 200MB/s Read and Write.

Does anyone have any idea why?

My system:
AMD X4 965
ASUS M4A79XTD Evo motherboard
12gb ram

See my results below and let me know if it would be helpful to provide any additional info.

Read:
dTjUXhe.png


Write:
ZZWmygh.png
 
With SATA 3Gbit you'll be limited to 300MB/s, if you're using SB750 chipset try downloading the latest drivers:
http://support.amd.com/en-us/download/chipset?os=Windows 8.1 - 64

If you're using Marvell 88SE6121 SATA controller I would try to get drivers for those.

I would also look into what TheGamerZ posted as well as download Samsung Magician 4.5 and check if you have the latest firmware.
 
Samsung has issued a firmware upgrade (10/23/2014) to restore performance, but I think your problem is that your motherboard only has SATA 3Gbs ports, not 6Gbs ports.
 
As already stated:

1. Make sure AHCI mode is enabled in BIOS for your SATA ports.
2. Ensure you have installed the latest SATA/Chipset drivers
3. Verify you have the latest firmware for both the MoBo and SSD.
4. Optional - enable RAPID mode in Samsung Magician.

Are you coming from an old-fashioned spindle drive? If so and your system boots and loads things much faster now that you have an SSD, then don't worry about what synthetic benchmarks are telling you. Just enjoy the SSD awesomeness.
 
Back
Top