Samsung 245T - Inverse Ghosting

orangeble

Weaksauce
Joined
Dec 19, 2007
Messages
104
Well I recently purchased the Samsung 245T, and have so far been pretty happy with the product. I've found no dead/stuck pixels, there's no black light bleeding, and I've yet to notice the horrendous input lag that people have been complaining about (yes even in games). However, I do have one annoying problem - ghosting, or more precisely inverse ghosting. Anytime I run a light image (ie cursor) over a dark grey image (like the background of this site) quickly enough I get this black trail following it. I've heard that such an issue stems likely from the overdrive used in this monitor and is an inherent flaw of all S-PVA panels (like the Dell 2407-HC).

So my question is: Is it possible to turn off the overdrive via the service menu, and if so how do you access it?

And second, has Samsung said anything about a firmware update to fix this issue, or are they going to ignore it like Dell?

This monitor would be perfect if it weren't for this problem, and I would really like to try and correct it.
 
I have a Samsung 214T and I have never had any problems at all. 0 dead pixels, very clear. Text, pictures, web pages, word, excel docs. 3D stuff, games, etc. look excellent.
I wish I could have a 30" LCD 4X3 aspect ratio;) I hate the wide screen aspect ratio for my PC; Perhaps I get another 214T to work with at least 2 apps at the same time full screen 4X3 aspect ratio.
 
^ Like I said, its seems to be a specific problem to the S-PVA panels. There's been plenty of reports of the Dell 2407-HC experiencing this problem and I've found a few threads that mention inverse ghosting on the Samsung 245T (though oddly enough, no proffessional review mentions inverse ghosting on either panel). It's possible that your monitor uses a standart PVA panel so you don't have the problem.

I've noticed one other interesting aspect of this issue. It appears as though my monitor only starts to experience inverse ghosting after it has warmed up for a few minutes. For example, if I go to this site right after turning my monitor on, I don't notice any inverse ghosting following my cursor at any speed. Now I don't think that my monitor is deffective, as a lot of people have reported inverse ghosting with these panels, but it is strange that the ghosting only surfaces after my monitor has been on for awhile.
 
Perhaps there is something wrong with your monitor, driver, video card, or any other hardware or device. I have tried moving the mouse around very fast in a no name LCD cheap monitor, my 214T, other cheap monitors that we have here at the company and I don't see that effect that you mention. If it was technology issue it would do it even if was cold. How old is your LCD monitor? Do you have not shielded speakers close by? Any other interference?
 
Even the the NEC monitor with this samsung panel has the same issue. I would avoid the 24inch PVA like the plague.
 
The Gateway FPD2485W, which uses the Samsung panel.....has inverse ghosting.
 

I've seen that report before, and thankfully this monitor's problem dosen't appear to be that bad. The only color where inverse ghosting appears is grey.

Right now, the only time the problem really bothers me is when viewing web pages with a solid dark grey background like this site . I've tested it with movies and games and have only noticed this ghosting when I was looking specifically for (this was in Bioshock which is a very dark game compared to most). Under normal playing/viewing conditions, the inverse ghosting was not easily seen.

Now, does anyone know how to access the service menu of this monitor? I'm hoping that if I can turn off the overdrive, I can fix or reduce the problem. As always, any help with this would be appreciated! :)

PS: I am pretty sure that Samsung uses S-PVA panels in their televisions also. Does anyone know if these TVs have the same issues with inverse ghosting?
 
Turning overdrive off would only be a trade of problems. PVA screens are by nature very slow, so they use a very agressive and heavy overdrive. Especially small adjustments like dark grey to grey would be slow on these panels. The agressive overdrive might be one of the reasons why they so much easier gets overdrive artifacts.

Service menu is usually found when either pressing a button combination within the menu or holding a combination of buttons while powering on the display.

As shown in the link from TFTcentral, adjusting RGB could improve on that problem. But, it will also have a negative effect on your colors.

If the problem is as minor as you describe, I would suggest you just accept it and move on. It seems you are otherwise happy about the display, so spend your energy enjoying it instead! ;)
 
^ Thanks, I've tried the combination used to access the Samsung 226BW service menu, but that didn't work. I think that I'll take your advice and just let it be. Every monitor I've researched has had some deffects, and this one seems pretty minor considering how great every other aspect of this monitor is. From the reviews/user opinions, this monitor seems to have the best picture quality and connectivety out of all the non IPS 24 in monitors, so I'll just stick with it, and not worry about the ghosting.
 
I thought I had found the perfect monitor after first fixing the overblown reds until I noticed ghosting while playing Assassins Creed. It's somewhat annoying while gaming but really not that big of a deal for me as I use it for gaming less than 10% of the time, and I haven't noticed it otherwise. Overall I'm happy with both of my 245T's and so far they're the best 24" monitors I've seen.
 
Back
Top