R0achTheWarHero
Limp Gawd
- Joined
- Jun 9, 2007
- Messages
- 488
Done with Spyder2Pro. Download the spyder software or some other profile loader because the windows one probably won't work with it.
This monitor was holding back a lot of potential, the 226bw is factory set to around 1.8 gamma (which is too light), the 245bw is set to around 2.3 (which is too dark). The colors didn't seem to be set by the factory very well either because things are way more vibrant looking after calibration.
Settings are everything at default except for:
- 55brightness
- In OSD change color control to:
Red49
Green46
Blue52
edit : Will upload new ICM, old one was a little too dark
This monitor was holding back a lot of potential, the 226bw is factory set to around 1.8 gamma (which is too light), the 245bw is set to around 2.3 (which is too dark). The colors didn't seem to be set by the factory very well either because things are way more vibrant looking after calibration.
Settings are everything at default except for:
- 55brightness
- In OSD change color control to:
Red49
Green46
Blue52
edit : Will upload new ICM, old one was a little too dark