Apr 2, 2007 #1 K KB24 n00b Joined Jan 13, 2007 Messages 23 How do I revamp the BIOS ? I bought a PC online and the dude locked the PC with a pass and can't remember it. I could get in Windows fine but not the bios. Could I remove that BIos and install a new one ? Someone told me I should flash the CMOS ?
How do I revamp the BIOS ? I bought a PC online and the dude locked the PC with a pass and can't remember it. I could get in Windows fine but not the bios. Could I remove that BIos and install a new one ? Someone told me I should flash the CMOS ?
Apr 2, 2007 #2 E eeyrjmr [H]ardness Supreme Joined Apr 23, 2002 Messages 4,363 get the user manual and follow the instructions for clearing the BIOS (usually a jumper/shorting pads/button when power is off and disconnected)
get the user manual and follow the instructions for clearing the BIOS (usually a jumper/shorting pads/button when power is off and disconnected)
Apr 2, 2007 #4 K killingfield1975 Gawd Joined Sep 18, 2006 Messages 636 dude just clear out CMOS and reset it. there are jumper settings on your mobo. its normally 3 pins. say if these "1" represents the pins and you normally would have 3 of them so... 111 and now your jumper was placed on pins 2 and 3 then it will look like this 1[11] so then remove the jumper so it looks like this [11]1 then power on the PC (it probably wont power on at this point) and now remove it back to 1[11] now try getting into your bios.
dude just clear out CMOS and reset it. there are jumper settings on your mobo. its normally 3 pins. say if these "1" represents the pins and you normally would have 3 of them so... 111 and now your jumper was placed on pins 2 and 3 then it will look like this 1[11] so then remove the jumper so it looks like this [11]1 then power on the PC (it probably wont power on at this point) and now remove it back to 1[11] now try getting into your bios.
Apr 2, 2007 #5 K KB24 n00b Joined Jan 13, 2007 Messages 23 thank you very much ; if we had a rep button I would press it . Thank you