Repairing a mobo

jpsteinmetz

Weaksauce
Joined
Nov 20, 2001
Messages
125
Hey everyone... not sure if there is any computer engineers out there, but i've got a ASUS A7V333 that's busted but i'm more than sure it's fixable. I know how to solder and have done a bit of electricial engineering work of my own. Basically two very small chips have been broken off the board directly above the CPU socket. I was hoping if anyone knows where I might be able to purchase replacement ones that I can solder onto the board in hopes of repairing it. The chips are right next to the numbers RN12 and C87. Again, directly above the CPU socket in the corner of the board away from the DIMM slots. I'd love to be able to fix this board. I would let ASUS do it... but i'd rather save the money since it's not exactly critical that I get it working again. Thanks for any help in advance.
 
With how much that costs, I'm pretty sure a brand new mobo would be the way to go.
 
Heh... if all else fails, yea that's not a bad option... but uh, it's sort of out of stock ;)

Usually components are about $1 each though, which is a good deal cheaper than $39. I'd rather see if I can fix it myself. Besides, it might be fun. hehe
 
Anyone that knows something about electronics... here's a picture of what's missing.

a7v333_parts.jpg
 
If you can buy them, i would first identify them, see if anyone sells them and then obviously buy them and try it out. For the job there it looks like a pain in the butt. Good luclk.
 
That was my plan. I found a great place to buy parts, www.mouser.com. Now I just need help identifying the parts... was hoping that's where you all come in hehe ;)
 
Alright guys... so some time later I was able to find someone who could identify and even send me the parts I had broken off my board. He's a great guy and apparently likes to repair mobo's for a living, or at least as a side gig. His name is Gary Headlee and his website is www.motherboardrepair.com

So today I get the parts, and a couple hours later, I get the parts soldered on. I turn on the computer, no go.

I look at the board again, and try to clean up some of the soldering job ... a couple minutes after that, I hook back up the mobo to some hardware, hit the power button and low and behold the BIOS screen pops up!! Folks, I did it. She's ALIVE!! :) And runs just as good as new.

<dances around> I fixed my mobo! I fixed my mobo!

Now... I just need to figure out what to do with the extra computer... hehe
 
<dances around> I fixed my mobo! I fixed my mobo!
Good job man!!
[Gunnery Sgt Hartman] You are definitely born again [H]ard!!! [/Gunnery Sgt Hartman]
 
Nice Job!

I am thinking about replacing some caps on an old P3 board for the heck of it. Was it pretty easy to solder on a motherboard?
 
Back
Top