Removing Stock ATi Heatsink

Status
Not open for further replies.

CompMage

Gawd
Joined
Sep 7, 2003
Messages
851
Ok I know I've seen a link to a how to around here somewhere I just can find it. I need to remove the stock heatsink on a BBATi Radeon 9700 Pro. Thanks.
 
Umm...this really should be in the Video Cards section...
All you have to do is squeeze the pushpins on the back of the card, and push them though the holes. Keep in mind, you are voiding your warranty.
 
Originally posted by thebro
what if you put it back on:rolleyes: :D

Most people are under the impression that theres some big way that manufacturers can tell if something was modified.. If the manufacturers are anything like the stores that sell their produts a lot of the times they can't or they don't even take the chance to look unless its obvious.

If the heatsink is held on like my nvidia card is (sounds like it), it should be fairly easy to get it off without obvious modification when re-applied.

As with anything else, nag enough when RMAing and you'll get what you want..
 
i had a pelt on my gf 4 and it went out then rma'ed it and they never knew:)
 
the compusa stock thermal material loox suspiciously like what they use on 9800's.

for the stock ATI hs, just pinch the pins and push them thru till they disengage the PCB and wiggle the hsf to separate the GPU and thermal pad.

there. your warranty is now proper fucked.

edit: btw this should be in Overclocking/Cooling
 
Originally posted by thebro
i had a pelt on my gf 4 and it went out then rma'ed it and they never knew:)

Nice to see that kids today have strong ethics. :rolleyes:


Thank you for making hardware prices higher for all the rest of us.
 
Originally posted by Magic H8 Ball
Nice to see that kids today have strong ethics. :rolleyes:


Thank you for making hardware prices higher for all the rest of us.

riiiiiiight....


Anyway...yeah just take it off, it should be pretty obvious...either the pins will just push through or there may be a screw, I have not seen a 9700 so i cant be sure but looking at my 9800 its just held on with a couple of small screws. And yeah keep hold of it...as long as you are careful dont worry too much.
 
Originally posted by Syphon Filter
riiiiiiight....


Anyway...yeah just take it off, it should be pretty obvious...either the pins will just push through or there may be a screw, I have not seen a 9700 so i cant be sure but looking at my 9800 its just held on with a couple of small screws. And yeah keep hold of it...as long as you are careful dont worry too much.

It's the truth man, but it's done every day, and if i spent $200-500 on a video card and i broke it i'd entertain the thought of returning it too, it's a vicious cycle...

As far as removing the stock heatsink, there are pins inside the pins that hold the sink to the card. Take a look carefully.. On the top of this pin there is a circular "pin", pull that out carefully with needle nose pliars. Then look on the other side, pinch the bottom of that larger pin, and the heatsink'll come off nicely... As far as returning it... don't remove the stock heatsink UNLESS YOU ARE WILLING TO BITE THE COST OF A DEAD VIDEO CARD. that said, good luck ;D
 
Originally posted by Syphon Filter
riiiiiiight....


Anyway...yeah just take it off, it should be pretty obvious...either the pins will just push through or there may be a screw, I have not seen a 9700 so i cant be sure but looking at my 9800 its just held on with a couple of small screws. And yeah keep hold of it...as long as you are careful dont worry too much.

If you do something to void the warranty on your hardware, and it breaks (especially if it breaks as a direct result of your modifications), you should take responsibility for it.

Putting stuff back and trying to RMA it without them noticing that you voided the warranty is stealing the way I see it.
 
Originally posted by Magic H8 Ball
Nice to see that kids today have strong ethics. :rolleyes:


Thank you for making hardware prices higher for all the rest of us.

No kidding, i was just gonna say the same things. I consider it wise to keep the stock cooler around incase I sell my card to someone who doesn't want my big-ass Giant III.....but never to try and RMA the card after I did something to it. It takes a real lack of morals in a person to RMA something after knowing full well what really happened. That's not cool or bold.....its dishonest.

Oh well, at least we know what kind of people a lot of you are already. :rolleyes:

EDIT: I'm actually not joking here people, grow up and live with your mistakes. Your warrantee from ATI does NOT include them basically buying you a new card just 'cus you felt like taking a chance on something.....use your head.
 
No need to jack the thread and turn it into a debate about RMA ethics....

I just removed the heatsink on my 9600 a couple hours ago, I'd imagine your card would be similar. Just took a pair of pliars and squeezed the clip that poked through the card, the clip was spring-mounted so it literally flew accross the room.

Once you get it off, isopropyl alcohol is your savior for cleaning... never knew it worked that well until today! :)
 
Originally posted by waddles
Once you get it off, isopropyl alcohol is your savior for cleaning... never knew it worked that well until today! :)

No kidding, it took me awhile to figure that out too. And I always thought that those towels did such a great job. ;)
 
well i guess i would be a 23 year old kid:D

also i myself do not make prices go up. hell it wasn't even my fault for it breaking. a cap blew, i didn't fry it.

not like im ocing a p4 to 4.0 ghz then rmaing it

understand where you all are coming from but i did not kill the card


Nice to see that kids today have strong ethics.


Thank you for making hardware prices higher for all the rest of us.
 
Originally posted by thebro
well i guess i would be a 23 year old kid:D

also i myself do not make prices go up. hell it wasn't even my fault for it breaking. a cap blew, i didn't fry it.

not like im ocing a p4 to 4.0 ghz then rmaing it

understand where you all are coming from but i did not kill the card

If it's due to something like that then OBVIOUSLY it's not your fault, I'm just sick of all the irresponsible ppl on here that RMA hardware after overclocking it and screwing themselves over. Take ownage for your actions and move on, maybe you'll be smarter next time. :rolleyes:
 
Hey to tell you the truth if I break my hardware on my own mistake the first thing I do is return it.. if I cant I get sneaky and buy the same product and stick my broken one in there.. it always works.. unless I buy it form an online store I dont bother than..

They make a 5x profit on these things why not take advantage of them as they take advantage of us?
 
they dont make a 5x on them


r&d
ads
workers
plants



they do make some but not that much
 
Originally posted by slaya
Hey to tell you the truth if I break my hardware on my own mistake the first thing I do is return it.. if I cant I get sneaky and buy the same product and stick my broken one in there.. it always works.. unless I buy it form an online store I dont bother than..

They make a 5x profit on these things why not take advantage of them as they take advantage of us?

This is exactly the stupid shit that I'm talking about. How the hell do you live with yourself knowing that you're cheating companies out of product.....that's just fucking low.

I'm sorry for the language but it's when some prick like slaya here actually comes out and fully admits to his actions that I get pissed.

I've worked in retail and seen shit like that happen all the time (product switched and returned) and it effects more then you'd think.

I think you need to grow some balls and grow the hell up, I just don't undestand people like you, no sense at all.
 
I have had wholesale access to electronics before, it sure as hell is not 5x markup. There is a LOT of work to turn sand into semiconductor.
 
Status
Not open for further replies.
Back
Top