removing molex-esc/SATA connectors

ingenious28

Limp Gawd
Joined
Jan 24, 2002
Messages
206
im sleeving my psu and i cant figure out how to remove the 4 pin motherboard power connector and the SATA power connectors,, anyone know??
 
As for the ATX +12v connector, they're a bitch and basically you have to take a pin and force back a couple of wings in there. But as for the SATA, they're on, and if you manage to get them off, they're not going back on.
 
Here's an article that might help you out from Gruntville as far as the 4 pin connector. As far as the SATA Vertigo Acid is right. Unless you want to cut the wires, get some new SATA pins and molex plugs (don't know where) and reassemble them. But that's sound like a real PITA.
 
Also, IIRC there was a thread a while back in cool cases where a guy had found crimpable SATA connectors, but the whole search being down thing...
 
for the SATA cables, it will be easier to get 1/4 sleeving, and frey and end to get it over the connector, and then cut off the freyed part when it's on... the 1/4 sleeve will stretch pretty far... for the heatsink, I think you'll need 1/2 inch for that...
 
Places like Frozencpu, Directron, and quite a few others for that matter sell a tool to release the 4 pin mobo plug without digging at the pins and taking the chance of screwing it up. I've seen them for around $20-$30 depending on where you look. What kind of PSU are you using? Some of them DO have the nice easy to rremove and replace SATA power connector. Any way of taking a decent picture of the connector?
 
Try to use that Radio Shack remover and you'll more than likely destroy 4 not-to-easy-to-get SQUARE pins. Those are 4 highly critical pins to be cheezing around with hoping for success.:rolleyes:
 
thanks all
actually i found a really small crochet hook and i was able to get those 4 square pins out with not all that much trouble.
3 came out fine and 1 got bent a little out of shape and needed some reshaping, but it all went back together fine. i kinda went lazy and just zipped tied and hid the SATA connectors.
but yeah that square pin remover woulda been awsome, i invested in a regular molex pin remover for the rest of the psu sleeving and it made the job 10 times easier.
 
Back
Top