• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Remove 3080 hybrid setup

T

triviumnate

Gawd
Joined
Feb 16, 2005
Messages
852
I have the 12G-P5-4868-KL
3080 hybrid is it possible to easily remove hybrid setup and put a waterblock on it for a customer loop?

thanks
 
There's nothing special about their assembly that would make it more difficult to disassemble than other GPUs. It's only the opposite (adding an AIO cooler to an existing card) which can present challenges if the cooler is not specifically made for whatever model you have.
Just don't neglect the obvious stuff, e.g. consult your desired waterblock manufacturer's compatibility lists, make sure you have some backup thermal paste and pads in case you mess any of it up and need to redo, etc.
 
It's most likely the same PCB as at least one other EVGA 3080 - they might have even used the same PCB for 10GB and 12GB cards.
 
jfreund said:
It's most likely the same PCB as at least one other EVGA 3080 - they might have even used the same PCB for 10GB and 12GB cards.
Click to expand...
This....

There are a lot of the same PCBs with different coolers from the factory...

search up your model of card with like repaste or teardown or thermal pad replacement and you probably can find a video or pictures of someone tear it apart to see the PCB. Then do the same with other cards to see the matching PCB.
 
You must log in or register to reply here.
Back
Top