Recovery from Dead JBOD

Mackowitz

[H]ard|Gawd
2FA
Joined
Apr 28, 2008
Messages
1,777
Had one drive in a JBOD setup go bad, I think. Setup is 4 x 1.5TB drives running as a 6gb JBOD on a Biostar 790gx xe motherboard, running Vista 32 Home Premium as my OS. NTFS formatted array using GPT as the partition table since over 2tb. Was having trouble copying some files to the drive last night, couldn't connect to the drive at all today and had a mess of Event 7 errors (bad drive) in Event Viewer. RAID Controller showed no errors and good SMART status, but can't argue with a freaking drive that won't load up in Windows.

Nothing precious, just (cough cough) Linux ISOs (cough cough), yeah, that's all. :rolleyes: But in theory I should be able to recover all but the 1.5TB on the bad drive, but gone with the array is the partition table. :mad: Can any [H] members recommend a good program that can read each raw disk and let me pull what files I can off of these drives? My google-fu is weak on finding a decent utility. Any help is appreciated.
 
You could try running SpinRite 6.0 on the affected drive, then try to bring up the array with the drive as part of the array.

Other than that, I can't really suggest anything. I'm not familiar enough with Windows JBOD, so I don't know which tools would recognise it as such.
 
Yes and then you may need to recover the partition data, for example with Active@ Data Recovery, which i used in the past. You would need the JBOD up and running with all member disks attached and all bad sectors fixed.
 
Thanks guys. It's JBOD off the RAID controller, so Windows just sees it as a single 6TB drive. At least it used to. :eek: Sounds like these two programs might help - will give them a try tonight. Best case would be to just get the array back up temporarily as you suggest, and then I can copy everything off and move on to shopping for decent RAID 5 controller. :)
 
Back
Top