• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Recommendations for koolance mod

S

soytrejo

Limp Gawd
Joined
May 12, 2002
Messages
129
Hello, I have an older koolance cooling case with 5/16" fittings. I am going to get some reducing couplers from Mcmasters but I am not sure if I shoulder go for 1/2" or 3/8" ?? I plan-for now to continue with the existing water pump-low flow-trying to find exact specs. I also just plan on cooling the cpu at this time(1700tbred doing 2.1 ghz at 1.85v on air). Any recommendations would be appreciated. I am looking to get a TC-4 block.
thanks
Frank :D
 
If you intend to go with a low flow pump, stay with a low flow block. Zalman has a nice one, anything by one of those german manufacturers would work fine, Innovatek stuff wold be nice.

You wouldnt gain anything by going TC-4
 
For a Koolance system, you can't really do any better then the Koolance 200G WB!
If you really feel a need to mod the system, then do it with fans ! :)
Going to Panaflo fans in the 32cfm range can pick you up a degree or two in mode 2, and even allow you to run mode 3 with less noise than you had before in mode 2 !
 
You must log in or register to reply here.
Back
Top