Recommend an 8 port switch because I keep killing them

Ryland

2[H]4U
2FA
Joined
Nov 19, 2004
Messages
2,504
Over the past year I have fried ports in 4 Linksys EZXS88W switches and I killed the last one without even touching it. My office is pretty dry so I am guessing that I am building up a static charge which is discharging into the port when I plug a cable in thus killing it (2 of the switches have been able to bring our network to a halt by broadcasting garbage.

Can someone recommend an 8 port switch that is tough enough to take something simple like a static discharge? I am tired of RMA' the POS switches we have.
 
HP procurves.

More ports than you're asking for, but they have next day replacement for the "lifetime" of the product. Not to mention the ports are all electrically separate from each other and losing one port due to electical damage doesn't hurt the others.

I'm sure you're looking for something a little smaller though, but this is all I can think of that won't take a crap on you for the littlest thing and still runs cheap.
 
Unfortunately I work in an extremely dry environment and the carpets here are not static friendly. Just walking 5 feet builds up a large charge. I have (2) Trendnet switches on order and I will see how those work out.
 
get an anti static mat, lol... for both where the switch sits, and the floor where you would stand when plugging something into it.
 
Just attach a wire to the metal housing of the switch and then to the frame of your building. That should ground out all the static.
 
The Linksys has a plastic case so it wouldn't have helped. I would think that they would have somehow grounded the ports but it sure doesn't seem like they did.
 
The Netgear FS108 has a metal case. It is not grounded through the AC adapter (none are if the plug has only two pins) so you will need to attach a grounding wire.
 
Frank4d said:
The Netgear FS108 has a metal case. It is not grounded through the AC adapter (none are if the plug has only two pins) so you will need to attach a grounding wire.
Get the GS108 instead :D

http://www.buy.com/retail/product.asp?sku=10332287&adid=17662
$62 - Netgear ProSafe 8 Port Gigabit Desktop Switch- GS108NA w/ FREE shipping

http://www.buy.com/corp/promos/google_offer.asp?adid=17073
Get $10 off your Buy.com purchase of $30 or more (before shipping and tax) when you use Google Checkout.

http://ak.buy.com/buy_assets/retail/pdfs/06Q3/1002-1031dw_multinetgear003.pdf
$15 Mail-in-Rebate

Final price: $37 Shipped, After Rebate... not bad for a gigabit switch. It has that grounding pin Frank4d mentioned, for connecting a grounding wire.
 
I may have to go that route if I fry the Trendnet I have on order.

Thanks all!
 
well I haven't killed either of the Trendnet switches yet. I even found that we had a 10mb hub linking our main servers together which just got replaced with a gigabit switch. Um, oops..guess thats what we get for letting someone else setup our internal network :)
 
The GS-108 (note GS, not FS. FS does not support Jumbo Frames) is the best buy I think.

It is not only a Gigabit switch, but it's the only consumer/soho class GB switch that supports Jumbo Frames (up to 9K).

If you mail-order, as soon as you get it make SURE you check the specs on the side of the box. The very last one should say JUMBO FRAME SUPPORT. If not, it's an old box and you need to send it back.

Netgear added this feature to the GS108 sometime last year, and did not change the model number. All the old one's should be out of circulation now, but you never know.

I got one from Tiger for like $69 and there is a $15 rebate on top of that.

-Larry


Frank4d said:
The Netgear FS108 has a metal case. It is not grounded through the AC adapter (none are if the plug has only two pins) so you will need to attach a grounding wire.
 
Back
Top