Reccomendations for a new system please

djdnz

n00b
Joined
Jul 28, 2002
Messages
38
Hey guys, this is what I have picked out so far, can you make any suggestions for things I may want to change? I'm not 100% on the video card, with it being so new I was thinking it may not be a good idea, but what do you guys think? Prices are Canadian.

CP1-AM2-4600 :: AMD Athlon 64 X2 4600+ 2.40GHz / 1MB Cache / 2000MHz FSB / Socket AM2 / Dual-Core (Windsor) / Processor with Fan (1 lbs)

$279.99


A455-2305 :: Asus M2N-SLI-Deluxe NVIDIA Socket AM2 ATX Motherboard / Audio / PCI Express / SLI Ready / Dual Gigabit LAN / S/PDIF / USB 2.0 & Firewire / Serial ATA / RAID (4.15 lbs)

$196.99


C19-4500 :: Crucial Ballistix Tracer 1024MB PC6400 DDR2 800MHz EPP Memory (0.1 lbs)
(two of these...@ $243.99 each)

$487.98 minus 60 dollar rebate


TSD-320AS :: Seagate / 320GB / 7200 / 16MB / SATA-300 / OEM / Hard Drive (1 lbs)

$126.99 minus 20 dollar rebate


A107-1050 :: Apevia Black X-Cruiser Case ATX Mid-Tower Case with Clear Side, Front USB, Audio and Firewire Ports (19 lbs)

$88.99


P450-8000 :: XFX GeForce 8800 GTS / 640MB GDDR3 / SLI / PCI Express / Dual DVI / HDTV / Video Card (3.35 lbs)

$571.99 minus 50 dollar rebate


O261-2005 :: OCZ / GameXStream / 700-Watt / ATX / 120mm Fan / SATA Ready / SLI Ready / EPS / Active PFC / Power Supply (5.85 lbs)

$165.99 minus 35 dollar rebate


N27-1895 :: NEC Super-Multi (AD-7170A) / 16x DVD±R Read / 18x DVD±R Burn / 8x DVD±RW / 8x DVD-R DL / 12x DVD-RAM / 48x32x CD-R/RW / Black / DVD Burner - OEM (2.25 lbs)

$50.99


subtotal: $1,969.91 + taxes - rebates
total: 2105.40

Thanks guys.
 
Have you thought about going Core2Duo? If you're going to get an 8800gts, I'd just as assume you would get conroe to get the most out of it.
 
A Core2Duo would be in your best interests. At stock speeds, the E6300 would perform on par with the X2 4600+, but would be about $45CAD cheaper. Pair it with a Gigabyte GA-965P-DS3 and Scythe Ninja Plus, and you're good to go. Also, that 700W GXS is overkill for an 8800GTS single card system. Go with the Corsair 520W instead.

http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2802
 
Thanks guys, I ordered the following, should be here within a few days - and its going to be my first build so I hope everything goes smoothly.

Gigabyte P965 DS3
Intel C2D E6400
XFX 8800GTS
OCZ DDR2 PC2-6400 2x1GB Platinum Rev2 XTC
WD 320GB S-ATA 16Mb Buffer
Cooler Master CPU Cooling Fan <<< http://www.tigerdirect.ca/applications/SearchTools/item-details.asp?Sku=C283-1038
Apevia X-Pleasure Black Case

I'm not too sure about the HSF, I tried getting a Scythe as suggested, but there were no websites I could find in Canada that were selling it. Also, the OCZ ram is apparently not always compatible with the DS3 motherboards, but as long as the voltage is set to 2.1V they say they should run fine - if not I can always return it and get something more expensive. Let me know what you guys think.
 
Well after you said the 700 was overkill, I had a look at the last powersupply I bought. It's an Enermax Noisetaker 420W, rated at:
+12V1 - 18A
+12V2 - 18A
+5V - 30A
3.3V - 30A
-12V - 0.8A

I was wondering if this would suffice for now? I checked the power supply calculator, and at full load it looks pretty borderline with the setup. The case I bought comes with a 500W Apevia PSU :rolleyes:... It would be nice if they would just give you a credit to buy a decent one lol. I'm just a little worried that if I buy a 520W Corsair now, if I go SLI in the future, I'll have to upgrade, and I'll have 3 useless power supplies lying around.

Theres the corsair 520HX you mentioned for 135, the 620HX for 165 (after rebate...); then the OCZ's 600W GXS is 125, and 700W is 131 (after rebate). Gah lol... what do you suggest I do?
 
Back
Top