• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Really Strange Voltage Readings?

R

Requiem

Limp Gawd
Joined
Nov 11, 2004
Messages
208
I just put together a new 2500K system with a MSI P67A-C43 today. Everything seems to be working, except the voltages I'm seeing in Speedfan seem to be really off. I noticed something similar with my previous build, which used the same power supply. Is this a sign of a major problem or are the sensors just confused or something? Thanks!

 
Either will suffice. See what it's reading directly on the PSU itself.
 
Just tested a molex connector and it had +5.08/+11.99 so those voltages seem good. I don't know why the +12 is reading so low in Speedfan... I'm more concerned about the VCC1.5V reading of 1.05V and the Vdimm reading of 2.16V. I don't know what the first value is, but the Vdimm is for the RAM and I have G-Skill Ripjaws which should be at 1.5V?
 
My guess would be that speedfan is reading the values wrong.
 
I tried a few and they all showed similar readings but then I went into the BIOS and everything seemed much better, so I guess it's just reading the wrong sensors or something
 
You must log in or register to reply here.
Back
Top