Rate this DD set up, what do you think?

[Majin]

Items

Copper TDX Block for Athlon64 754/939/940
One of the top performing blocks in the world!
Selected options:
Top Style: Lucite
Fitting Size: 1/2" OD High Flow Chrome Fittings (For 1/2" ID Tubing)
Spare O-Ring: Extra O-Ring
Accelerator Nozzles: Yes - #2, #3, #4, #5, and blank with wrench
$57.94 x 1 = $57.94

Or
G4 Storm
--------------------------------------------------------------------------------

ASUS A8N MAZE4 Chipset Block
Designed to fit the ASUS A8N Motherboard with two SLI Cards.
Selected options:
Top Style: Lucite
Fitting Size: 1/2" OD High Flow Chrome Fittings (For 1/2" ID Tubing)
Spare O-Ring: Extra O-Ring
$40.50 x 1 = $40.50
--------------------------------------------------------------------------------

MAZE4 GPU For Most ATI and Nvidia Cards
A high performing low flow resistant water block that performs well with any combinatin of components. Extra height to clear RAM sinks on the video card.
Selected options:
Color: Blue
Fitting Size: 1/2" OD High Flow Chrome Fittings (For 1/2" ID Tubing)
Video Card To Cool: X850XT-PE
$44.95 x 1 = $44.95
--------------------------------------------------------------------------------

Black Ice XtremeIII Radiator
The Black Ice Xtreme 3 takes Xtreme PC Radiator performance to a higher level. Based on the powerful Black Ice Xtreme platform, the Xtreme 3 triple performance with three times the surface area accomodating three 120mm fans on a high density double row copper-finned core.
Selected options:
Color: Blue
Fittings: 1/2" OD Fittings
$79.99 x 1 = $79.99
--------------------------------------------------------------------------------

Tygon 3603 Tubing 1/2" ID 3/4" OD
The highest quality, most reliable tubing on the market.
$2.80/f x 15 = $42.00
--------------------------------------------------------------------------------

The Danger Den DD12V-D5
Laing has just made the best pump better. The new D5 boasts improved performace and quieter operations then the older D4.

Designed with a 50,000 hour mean time before failure (MTBF).
Uses a 4 pin standard computer molex connector
Use with 1/2" or 3/4" ID Tubing
Compact size allows installation almost anywhere in the case
Is powerful enought to supply multiple cooling block solutions (CPU/GPU/Chipsets)
This new version also allows the "tuning" of the flow with a built in reostat. Danger Den recommends running the pump on the #5 Setting.
Details :
Weight 2.00 lbs
Price: $74.95
Options :
Fitting Size 1/2" OD Fittings (For 1/2" ID Tubing)
Quantity Out of stock

Delivery method: FedEx International Economy ($31.67)
Subtotal:
$340.33
Shipping:
$31.67

TOTAL:
$372.00

I plan to buy an FX 57
Is this a good set up for my Specs

 

[R1ckCa1n]

I would personally wait for the G4 from Swiftech. Would be well worth the wait.

 

[Majin]

I would personally wait for the G4 from Swiftech. Would be well worth the wait.

I was thinking about getting the G4 instead of the TDX.
So With the G4 instead of that TDX, this would be a bad ass set up?

 

[Pooky]

I'd go with the G4 instead too (I'm planning on getitng one). How about the Thermochill PA160 instead of the triple 120? It's a little more expensive, but fits in the space of a 120mm fan, as long as the space is wide enough, and offers excellent cooling power. Just grab a decent flowing 120mm fan of your choice and you're set, instead of needing 3, unless you want 3, that is. If DD doesn't have any stock yet, wait, if they're reall going for $90, no one else can touch that price!

 

[R1ckCa1n]

How about the Thermochill PA160 instead of the triple 120? It's a little more expensive, but fits in the space of a 120mm fan, as long as the space is wide enough, and offers excellent cooling power. Just grab a decent flowing 120mm fan of your choice and you're set, instead of needing 3, unless you want 3, that is.

This is a great idea. That would make a killer setup.

 

[Majin]

This is a great idea. That would make a killer setup.

I have a CM Stacker, if I wanted I could fit 3 of these tripple cores in it!