• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Rate my cabling job.

N

natermeister

Limp Gawd
Joined
Dec 26, 2005
Messages
463
I want some people to look at the job I did routing my cables to see if it's any good. I'll say it's as good or better than a lot of the high-end PCs I've seen reviewed in magazines like Maximum PC. VoodooPC and Falcon Northwest boxes excluded.

picture004ok7.jpg


I know it's not the best picture, but my friend only had a couple minutes to snap a few of them and he didn't have time to properly calibrate his camera. I don't have Photoshop anymore so I couldn't do any cloning/healing work either.
 
invert HD rack, go behind the mobo for all the cables(those you can)...
Dont be afraid to cut behind the mobo, if you make a mistake no one will ever know...
 
Yeah, that would probably help.

I tried mounting the hard drive backwards and routing the SATA and power cables behind, but the side panel wouldn't fit with it like that. Not enough clearance. It might work out differently if I actually reverse the rack itself.
 
natermeister said:
Yeah, that would probably help.

I tried mounting the hard drive backwards and routing the SATA and power cables behind, but the side panel wouldn't fit with it like that. Not enough clearance. It might work out differently if I actually reverse the rack itself.
Click to expand...

reverse the rack and cut a hole in the back to let the wire route easily... If you want some inspiration look at this thread, your case is one that you'll seen most often... http://www.hardforum.com/showthread.php?t=703539
 
I think you can clean it up a ton more. Do what the other suggested and you should be all set :)
 
You must log in or register to reply here.
Back
Top