Raspberry Pi Can Now Be Overclocked

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Those of you that own a Raspberry Pi can now overclock your unit for a 50% performance gain. The best part, it doesn't void your warranty. ;)

You can now choose from one of five overclock presets in raspi-config, the highest of which runs the ARM at 1GHz. The level of stable overclock you can achieve will depend on your specific Pi and on the quality of your power supply; we suggest that Quake 3 is a good stress test for checking if a particular level is completely stable.
 
The water blocks will probably cost a minimum of $150
For as small as the Raspberry Pi is, you would be better off buying half a gallon of 3M Novec 7000 liquid and completely submerging your Raspberry Pi in that.
 
ok, am I the only one seeing the humor in this? Water block is maybe, umm, 4X the cost of the Pi?! Plus having a liquid cooling system on the Pi makes that credit card sized device into a shoe box sized device. :D

Cool about the OC stuff, though.
 
ok, am I the only one seeing the humor in this? Water block is maybe, umm, 4X the cost of the Pi?! Plus having a liquid cooling system on the Pi makes that credit card sized device into a shoe box sized device. :D

Cool about the OC stuff, though.

RTFA man... RTFA, there's no mention of needing a water block.
 
whelp i have no excuse not to buy one now. 1ghz will make this thing smoke and run xbmc nicely.
 
RTFA man... RTFA, there's no mention of needing a water block.
3M Novec 7000 would do a better job than a water block or air cooling anyway, and I think it would pay off rather quickly. This liquid would be the end all to pretty much all enthusiasm with overclocking the Raspberry Pi. :D

Submerge it into a small tub with a finned heatsink as part of the heatsink (so that the evaporated liquid can recycle and return to the pool), and overclock it to the max.
 
3M Novec 7000 would do a better job than a water block or air cooling anyway, and I think it would pay off rather quickly. This liquid would be the end all to pretty much all enthusiasm with overclocking the Raspberry Pi. :D

Submerge it into a small tub with a finned heatsink as part of the heatsink (so that the evaporated liquid can recycle and return to the pool), and overclock it to the max.
Correction: finned heatsink as part of the CEILING (fins pointing down, base against ceiling).
 
I still cry a little when I see quake 3 running on a cell phone, or a freaking $25 embedded system board. Quake, Doom, etc I can understand, they are rudimentary 3d/2d sprites. But quake 3 was 3D, had variable tessellation for curves, etc. I remember overclocking my Duron 600 chip to 1Ghz, and overclocking my TNT2 Ultra just to run it nicely...
 
RTFA man... RTFA, there's no mention of needing a water block.

Yeah, dude, I did. Then I continued to read ALL the posts under the first and I was commenting on the post about cooling it. Sorry, thought that was an obvious progression of the thread - to make comments. :confused:
 
Yeah, dude, I did. Then I continued to read ALL the posts under the first and I was commenting on the post about cooling it. Sorry, thought that was an obvious progression of the thread - to make comments. :confused:

Knowing the difference between sarcasm/jokes and serious comments also plays into that progression.
 
3M Novec 7000 would do a better job than a water block or air cooling anyway, and I think it would pay off rather quickly. This liquid would be the end all to pretty much all enthusiasm with overclocking the Raspberry Pi. :D

Submerge it into a small tub with a finned heatsink as part of the heatsink (so that the evaporated liquid can recycle and return to the pool), and overclock it to the max.

If you are gonna use HFE 7000 might as well get a microchannel block and run HFE-7000 in a loop at a relatively low flow rate.
 
A couple of heatsinks and my Pi's are in business. These things are fun.
 
Back
Top