Random Rebooting

Lurk

n00b
Joined
Mar 12, 2005
Messages
39
Alright... so I have my comp built with the specs below:

Mobo: evga 680i
CPU: C2D e6600
Ram: Corsair ddr2 800 dominator 2gb
Vid Card: evga 7900gs ko
HDD: western digital 250gb sata
PSU: thermaltake purepower 420w

The comp can't even stay on for 10 mins before rebooting and kinda... freezing on bios.

I have a feeling it's got to be something with the power supply or related to the power supply. I have a 4 pin connector for the CPU (4 otherpins aren't connected).

Also, I have a 20 -> 24 pin adapter... maybe that could be it too. Better to use 20 pins or an adapter from 20 to 24 pins? I'm currently using the adapter.

Should I consider a 4 to 8 pin adapter?

I've reset the cmos a few times and this still happens.

I don't really have the budget for a new power supply..

The thing that gets me is... it was working the whole day yesterday... this morning I can't even get it to stay on for 10 mins. It even freezes when I'm in the bios.
 
It could also be a heat issue. Go into the BIOS and watch the temp. monitors. Otherwise, you probably drained the life out of that PSU, haha. You should consider a MUCH better PSU than that. Go for the Corsair 520W for $96AR at zzf. If you don't have cash, go for the XClio Goodpower 500W from the egg for $52. Think about it this way... if you keep buying cheap, crappy psu's, one of them might take out your $250 mobo, $300+ CPU, $300+ ram, and $150+ vidcard; then you'll have a much bigger problem than just replacing a PSU. A good PSU is part of protecting your hardware investment.

http://psu.thetruck.net
http://jonnyguru.com
http://hardforum.com/showthread.php?t=1045259

Oh, if its a heat issue, make sure the cpu hsf is on properly.
 
Shouldn't be a heat problem... idles around 27 degrees.

But how is it that it worked the day before?

Alright, considering the XClio Goodpower..
http://www.newegg.com/Product/Product.asp?item=N82E16817189005

Everything boots up fine... but the screen just goes black and bios comes up a second later.

Also... it seems to freeze while I'm in the bios if I'm in there for a few mins.
 
try another psu first, if you have one handy. otherwise, replace that pos. it only worked for one day? i'm guessing it worked more than that, and over time the power required by the system just taxed those caps too much. it must be somewhat old if it only has a 20-pin connector. also, it was a very good psu to begin with, lol.
 
Alright, so I tried an Antec SmartPower 400watt just for the hell of it.

It worked. But When I put it in the case, it didn't fit.

With the evga 680i motherboard, how would it perform with only 20 of the pins connected?
 
Back
Top