• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

RAM or PSU...classic

SupaMan

Man of Silicon
Joined
Jan 17, 2001
Messages
5,670
The classic 'hey guys what should I buy.' I havent posted a thread in a million years and well...I'm bored.

So I pose an upgrading question to you. Of course I already know what I want to do at this point, but I want to hear what you think.

Door #1...

upgrade my 2x256MB XMS3500C2 to 2x512MB XMS3500C2

Naturally I play a bunch of games, a few are real memory whores, like BF1942 and planetside. I also use photoshop a decent amount, but not a lot. I've never actually run into an out-of-memory error though.

Door #2

upgrade my Enermax 431W PSU to PC Power and Cooling TurboCool 510W

I am adding a pelt or two to the system, and considering my motherboard draws off the 12V line, I am going to start rubbing up against what the PSU can handle. The enermax is ~20A on the 12V....the PCP&C is 34A :) Also the enermax's noise is a bit high for my liking, the PCP&C should be somewhat quieter.
 
How big are the Peltiers going to be, because most high wattage (223w) pelts need a dedicated PSU, but if they are lower wattage you should get the PSU, although antec's True550 EPS has +12V @ 36A, and it's easy to get a convertor for EPS to ATX. Enermax's EG651P-VE also provides 36A, so you may be able to save some cash. No doubt the PCP&C will be great as well.
 
Memory, unless you're gonna need the PSU for your cooling...gonna have to be something you should look at.
 
Back
Top