• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

RAM and an OC proc.

J

JasonG

Limp Gawd
Joined
Jul 9, 2003
Messages
202
Right now I have a P4 3.06 OC'ed to 3.4 and have pc2700 RAM at 2.5-3-3-7 running at 148mhz also at 1:1. I'm thinking the RAM is what's holding up my OC from going farther. So I've been looking at some better RAM. Opinions on Kingston HyperX pc3000 or pc3700?

pc3000 2-2-2-6
pc3700 3-4-4-8

other suggestions? I'm open to any and all input. Thanks.

JasonG
 
It's just some generic brand RAM. I've tried taking it higher but it isn't stable in the testing I do to it.

JasonG
 
could be the ram but still generic or not pc2700 should run at 166mhz. if you think its the ram then try some other ram and see if it helps.

could be that you hit the lmit on the cpu.
 
Would you recommend the pc3000 since it has the lower timings? or the pc3700 since stock it is allready more than fast enough for me? Thanks again.

JasonG
 
get the corsair pc3200LL for the low timings plus they have been knowen to do 220+fsb
 
You must log in or register to reply here.
Back
Top