Raid 1+0

ThePerformer

Limp Gawd
Joined
Jun 9, 2003
Messages
284
When a drive fails in a 1+0 RAID setup, does the system crash or continue going? Specifically, on a Tyan dual Opteron server mobo.

Thanks!
 
stuff should keep working normally. thats the purpose of RAID 1. But you should rebuild the RAID array immediatly after replacing the dead drive (good RAID controllers have a back-up drive already in place to do this automatically, otherwise it'll yell at you when/if a drive dies and you put a new drive in it's place, and reboot into the controllers bios and rebuild the array. some of them do this from windows/linux too).
 
Back
Top