xlt92explorer
[H]ard|Gawd
- Joined
- Sep 3, 2007
- Messages
- 1,135
Hey guys, hoping someone here can provide some insight here to an issue I've been fighting with for the better part of the week..
I've got a Server 03 R2 SP2 box running a domain (AD, DNS, DHCP, IAS, IIS, you get the idea..). I've also got an HP Procurve 2824 switch, updated to the latest firmware, and a D-Link DWL-2100AP, also with the latest firmware.
I've been successful in getting 802.1x to work with the AP after a little futzing around, not a big deal. When I try to get 802.1x to authenticate using the switch, though, it fails. Here's the config running on the switch now..
gotbump# sh run
Running configuration:
; J4903A Configuration Editor; Created on release #I.10.70
hostname "gotbump"
interface 1
no lacp
exit
interface 2
no lacp
exit
interface 3
no lacp
exit
interface 4
no lacp
exit
interface 5
no lacp
exit
interface 6
no lacp
exit
interface 7
no lacp
exit
interface 8
no lacp
exit
ip default-gateway 192.168.0.1
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-24
ip address 192.168.0.254 255.255.255.0
exit
aaa authentication port-access eap-radius
radius-server host 192.168.0.105 key ist402
aaa port-access authenticator 1-8
aaa port-access authenticator active
Windows prompts me for authentication, which I enter (same credentials as I use for the wireless), and it fails and prompts again. I ran wireshark, and the requests are making it to the switch, and being refused.
Any thoughts?
I've got a Server 03 R2 SP2 box running a domain (AD, DNS, DHCP, IAS, IIS, you get the idea..). I've also got an HP Procurve 2824 switch, updated to the latest firmware, and a D-Link DWL-2100AP, also with the latest firmware.
I've been successful in getting 802.1x to work with the AP after a little futzing around, not a big deal. When I try to get 802.1x to authenticate using the switch, though, it fails. Here's the config running on the switch now..
gotbump# sh run
Running configuration:
; J4903A Configuration Editor; Created on release #I.10.70
hostname "gotbump"
interface 1
no lacp
exit
interface 2
no lacp
exit
interface 3
no lacp
exit
interface 4
no lacp
exit
interface 5
no lacp
exit
interface 6
no lacp
exit
interface 7
no lacp
exit
interface 8
no lacp
exit
ip default-gateway 192.168.0.1
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-24
ip address 192.168.0.254 255.255.255.0
exit
aaa authentication port-access eap-radius
radius-server host 192.168.0.105 key ist402
aaa port-access authenticator 1-8
aaa port-access authenticator active
Windows prompts me for authentication, which I enter (same credentials as I use for the wireless), and it fails and prompts again. I ran wireshark, and the requests are making it to the switch, and being refused.
Any thoughts?