CrimandEvil
Dick with a heart of gold
- Joined
- Oct 22, 2003
- Messages
- 19,670
http://www.penstarsys.com/editor/company/ati/r520/index.html
Oh, leave the fan-boy crap outside.
So I was alittle worried when I didn't see anything about R520 at Computex last week (although XFX had SLIed G70s). What do you guys think?It has been widely commented on that TSMCs 90 nm Low-K process is actually quite robust, and the yields and bins are better than expected with such a new and complex process. So if ATIs R520 taped out so long ago, and TSMCs process is running at a higher efficiency than expected for this time frame, where are the R520 parts? The information I have received paints a rather grim picture for ATI. Add to that the recent information released by ATI about the lower than expected revenues due to product pressure and poor yields and packaging problems, things are not as happy as they should be.
The information on the R520 suggests that there are some extreme yield problems with the current design. Not only are there few working dice per wafer, but a large number of those dice only have 16 pixel units working, and others are lucky to get 24 working. The information I received suggested that the R520 was in fact designed with 32 pixel units (each with multiple ALUs), but due to the issues that the chip is facing, very few of them so far are fully functioning. There are of course fully functioning parts that have been shown behind closed doors, and apparently Abit showed off a working card at AConn that scored some impressive 3D Marks.
Oh, leave the fan-boy crap outside.