Quick question on adding a 2nd AD integrated DNS server

mesostinky

n00b
Joined
Sep 29, 2005
Messages
28
Hi, I have what I think is an easy question on adding DNS servers to an AD network.

When the DNS is AD integrated you just add the DNS service via add windows components and then replication takes care of everything else right? With AD integrated they are all "master" DNS servers? Nothing else to configure besides adding the other server to the DHCP scope options?

In the past when testing I mistakenly added the 2nd server and made it a primary server for a zone which already existed. Really made a mess of things and had to start over.

Thanks.
 
I'm a little out of date with my Microsoft, but I'm pretty sure that all DCs are already DNS servers, and all AD-integrated zones are automatically pushed to all DCs.. it's pretty automatic from what I recall (just point the clients, like you said).
 
It's only automatic on the first server you setup when installing AD. Other servers get added to AD but DNS isn't automatic on them you have to do it yourself. Thanks.
 
It's only automatic on the first server you setup when installing AD. Other servers get added to AD but DNS isn't automatic on them you have to do it yourself. Thanks.

Per the user's question. Installing the DNS service on a DC will automatically publish all AD integrated zones on that DC.

In a 2003 or higher operational mode for AD, it may take one replication cycle before all the DNS zones publish as you have the option of only replicating DNS schema information only to DNS servers, so there can be some lag.

For example, an AD controller is in a remote site with a Inter-site replication interval of one hour. DNS is added to that AD controller. AD hosted DNS zones replicated to all AD controllers will publish within the 5 minutes or so. AD hosted DNS zones set to replicate only to DNS servers will not be published until after the next Inter-site replication. Depending on the timing, this could take slightly more than one hour.
 
If the second server is already a domain controller, then yes, just install DNS and you should be good to go.

You will need to define what you mean by "active directory administration" in order to get much help.
 
Back
Top