Quick mobo/cpu combo questions. need experienced advice.

import

[H]ard|Gawd
Joined
Oct 14, 2002
Messages
1,467
right now, there is a big dilemma. need some help, preferably from knowledgeable sources.

processors: q6600, q6700, q9450.
motherboards: evga 780i sli or evga 750i ftw
will be running dual 9800 gtx's. its a gaming machine, will be trying overclocking. (getting this ram) once i figure read more. im unsure how ram comes into play.

AAAAANYWAY....

im having a terribly difficult time deciding on the mobo/cpu combo.
i wont list the specs, im sure most of you know them-
can anyone offer insight into a decent cobo. i know the q9450 is the new one, BUT- its backordered EVERYWHERE.
 
The Q6600 is the most appealing deal due to its price. Although the Q6700's price has dropped as well, the Q6600 and the Q6700 have the same OC threshold. The Q9300 (based on the same 45nm Yorkfield CPUs as the Q9450) is another option, but its low multiplier doesn't make it the best choice for overclocking. (Sadly, the Yorkfield CPUs are capable of high overclocks, but due to their relatively lower multipliers, you have to stress the motherboard's northbridge more in order to attain those speeds.)

One of the 9800GTX cards would be good enough for a 1920x1200 resolution in most games. If you really want SLI, though, you would be better off with two 512MB 8800GTS cards, which offer similiar performance at a lower cost. (There are a couple of sales in NewEgg right now where the 8800GTS could be bought for under $200AR.)
 
roughly where does the q9450 max?
any opinion on the motherboard?

as for the vid cards, but the 9800gtx is newer architecture, i look at it like buying the quad core vs a dual core.
 
Here are some OC figures for the Q9450...

enginurd said:
Stated FSB/4 = Actual FSB
Multiplier x Actual FSB = CPU Speed
2 x Actual FSB = RAM Speed

Q9450:
Multi x Actual FSB, RAM Speed = Clock Speed
8 × 333Mhz = 2.6Ghz, DDR2-667 <<== Stock speeds
8 × 400Mhz = 3.2Ghz, DDR2-800 <<== Easy OC
8 × 450Mhz = 3.6Ghz, DDR2-900 <<== Good OC
8 × 500Mhz = 4.0Ghz, DDR2-1000 <<== Excellent OC

The problem is that many motherboards have stability issues after pushing the FSB beyond 400MHz. Intel's X38/X48 chipsets are reportedly able to maintain a high (>400FSB) overclock, but those chipsets also have native CrossFire support, which won't help you with your video card plans.

The dual-core/quad-core analogy is a bad one to use for the differences betwen the 8800GTS and the 9800GTX. (Besides, the 9800GX2 is the one with two GPUs on one card.) Both cards use variants of the same GPU, only the 9800GTX is more efficient than the 8800GTS. (If you do a side-by-side comparison, they both have similar specs.) I'm recommending the 8800GTS, especially if you intend on using SLI, because even though the 9800GTX performs 10%-20% better than the 8800GTS (depending on the game/benchmark), the 8800GTS is at least $50 cheaper.

The thing that I base many of my recommendations off of is the price/performance difference. Basically, it means that I don't see it worth you paying $50-$100+ more for a mere 10%-20% improvement in games.

Before I forget about the RAM, here's a simple rule: Buy DDR2 800 for the Q6600/Q6700, and DDR2 1000 for Q9300/Q9450. The RAM speed is the most important thing to look for, so you don't need any "high performance" kits like the Corsair XMS2 series.
 
Q9450 could reach 4Ghz, IIRC. For best SLI performance, go with the 780i.

The 9800GTX uses the SAME GPU as the 8800GTS 512MB, which is a G92. :p Though, if you'd rather avoid SLI, get the 9800GX2 and a P35 board. P35 boards run cooler, are more reliable/stable and can OC better than nForce 700i boards.

You won't notice a difference between CL4 and CL5, unless you're running benchmarks (and even then, the difference is negligible), so don't pay a huge price premium for lower latency. If you go with the Q9000 series CPU, get this RAM:
$90 - G.SKILL 4GB(2x2GB) DDR2-1000 F2-8000CL5D-4GBPQ
 
lots of info above... after reading more, my final setup was:

750i sli ftw & q6700
evga 9800gx2
ocz sli 2x2gb

i figure the 9800gx2 will be right along with the 9800gtx sli or 8800gts sli, if not better, and with the mobo, i can always go with another gx2 down the road, and be set for a long time.
with the ram being "sli" will it show any benefit at all with the gx2?

is there any flaw in that...
 
"SLI" on RAM just means EPP, which was developed by NVIDIA, IIRC. Its sort of an extension of the SPD tables. Its for the lazy people who don't want to set their timings manually. Its more of a marketting gimmick than anything, though, IMO. It has nothing to do with SLI.
 
Back
Top