quick build critique

8fingers

Limp Gawd
Joined
Jan 18, 2005
Messages
293
feel free to throw your $.02 my way or a couple hundred if you feel so inclined.

$250 ASUS A8N-E
Athlon 64 3200+ Venice (Tech Tour)
Stock cooler
$295 Sapphire x800XL $295
$190 OCZ Plat. Rev. 2 or OCZ EL PC4000 VX Gold, (same price) either way 2x512
$ 50 NEC 3520a
$141 WD 300GB SATA @ newegg (3yr.)
$ 75 Antec Super LanBoy

the tech tour stuff is certain, as is the video card. need suggestions one way or the other about the RAM. what PSU? i looked around, but couldn't find one under $100 (prefer ~80) with 25+amps on 12V line. ideas there? and last but not least, sugestions on a case would be nice. i like the lanboy because it's aluminum and has 2x120mm fans. the build is for a high school senior, headed to college, so "small" (not full-tower, like me) and "light" are good. both terms are relative, i know.

so, do your worst!

 
Spectre said:
But there are others that will work. What do you want from it? Quiet? Looks? Modular cables? etc.

performance first, quiet second, looks third

and why has no one else said anything? c'mon people!?!

 
im just preaching for my own stuff here, but i really like the ocz modstream's

im happily running my system on mine, no problems at all - looks good and its nice and quiet
 
Ok so for those criteria look at the following:

ATX12v1.3

TTGI/SuperFlower 550W, 14cm Fan (30amps on 12v, 14cm fan is dead silent, and looks good. I have this PSU....actually the review at SLCentral is my unit)
http://www.directron.com/tt550k14.html

OCZ ModStream 450W (26A on 12v, 12cm fan, fairly quiet, looks good. Warning though the main ATX is short in some cases)
http://www.directron.com/ocz45012u.html


ATX12v2.0

ENERMAX EG425P-VE SFMA 2.0 ATX12V 420W (Strong for the price with 18amps on each 12v not additive, not so quiet, nicely finished)
http://www.newegg.com/Product/Product.asp?Item=N82E16817103459

Fortron Blue Storm AX500-A ATX12V 460W (Strong 15amps on each 12v not additive, fairly quiet 12cm fan, some like the color, can be found cheaper by shopping around)
http://www.newegg.com/Product/Product.asp?Item=N82E16817104934

The ANtec I listed earlier, and for quiet the Seasonic's http://www.newegg.com/Product/Product.asp?Item=N82E16817151023
 
i have the ocz rev. 2 ram and the same dvd drive as u and have had no problems as of yet with them...i believe the ocz VX ram needs high voltages to get high speeds and low timings...while the rev. 2 is TCCD and requires less voltage but will have a bit looser timings...i dont think the asus board can give high voltages like the DFI board...are u gonna be overclockin?
 
lcboyee1123 said:
i have the ocz rev. 2 ram and the same dvd drive as u and have had no problems as of yet with them...i believe the ocz VX ram needs high voltages to get high speeds and low timings...while the rev. 2 is TCCD and requires less voltage but will have a bit looser timings...i dont think the asus board can give high voltages like the DFI board...are u gonna be overclockin?

i have the NEC myself, no questions on that one, it stays.

i personally have the TCCD OCZ Plat. Rev. 2, but the Plat. Rev. 2 being sold now is TCC5. supposedly same quality/performance as the TCCD though. i can't seem to find the max voltage the A8N-E will output for the RAM... i know the DFI does an insane 4.0V.

probably no OC'ing for a year? (unsure), as this will be quite a performance upgrade for the user, no need to void warranty's yet.
 
I would ditch the stock cooler and spring for a Zalman CNPS-7000B ALCU or CU. Much quieter and effective than stock. Will cost a few $$ more, but IMHO, it's worth it.
 
Have to say how surprised I was at how quiet my stock cooler is. It's pretty efficient too.

I'm in no hurry to upgrade it, like I normally would.

As for PSU's I love my Enermax Noisetaker 485W. Out of all the kit that arrived for my new build a few months ago, that was the item that really impressed me. Powerful, quiet and fantastically finished. :)
 
Back
Top