Questions about Readyboost

Joined
Oct 29, 2003
Messages
945
Do I need to have a USB 2.0 stick in order to use readyboost?

Or I can just plug a SD card into my USB 2.0 memory card reader and use readyboost from there?

Also does it matter if I use a 1GB or 2GB card for readyboost? Does it actually take up the entire space of the card in order to use readyboost?
 
USB Flash-RAM based products or media card (SD, Mini-SD, MemoryStick, etc) are all acceptable for ReadyBoost duties.

What matters is the read/write speeds the media is capable of. ReadyBoost requires a certain speed for random reads as well as random writes, and Vista will perform the necessary tests when the device is first inserted to see if it's capable of ReadyBoost duties.

If it is, the dialogue box that pops up (AutoPlay) will list ReadyBoost as an option, click that, change the slider to reflect how much of the available space you want to assign for ReadyBoost duties, and wham, you're off.

USB 2.0 is required for USB thumbdrive based media since USB 1.1 has a top speed of about 900KB/s even with the best USB media you can buy. USB 2.0 can easily handle the requirements for ReadyBoost random read/write speeds.

The recommended usage for space is either a 1:1 or 2.5:1 ratio. Examples:

If you have 1GB of RAM in your machine, use 1GB of space for the ReadyBoost cache for a 1:1 ratio, or...

If you have 1GB of RAM in your machine, use 2.5GB of space for the ReadyBoost cache is your USB device has the space (4GB USB thumbdrive, obviously, could handle 2.5GB easily).

You can't use USB hard drives for ReadyBoost; they're fast in terms of top transfer speeds, but their random access times are too slow. Flash-RAM products are nearly instantaneous just like physical chip RAM is, thousands of times faster than even the fastest hard drive manufactured today.

Hope this helps...
 
USB Flash-RAM based products or media card (SD, Mini-SD, MemoryStick, etc) are all acceptable for ReadyBoost duties.

What matters is the read/write speeds the media is capable of. ReadyBoost requires a certain speed for random reads as well as random writes, and Vista will perform the necessary tests when the device is first inserted to see if it's capable of ReadyBoost duties.

If it is, the dialogue box that pops up (AutoPlay) will list ReadyBoost as an option, click that, change the slider to reflect how much of the available space you want to assign for ReadyBoost duties, and wham, you're off.

USB 2.0 is required for USB thumbdrive based media since USB 1.1 has a top speed of about 900KB/s even with the best USB media you can buy. USB 2.0 can easily handle the requirements for ReadyBoost random read/write speeds.

The recommended usage for space is either a 1:1 or 2.5:1 ratio. Examples:

If you have 1GB of RAM in your machine, use 1GB of space for the ReadyBoost cache for a 1:1 ratio, or...

If you have 1GB of RAM in your machine, use 2.5GB of space for the ReadyBoost cache is your USB device has the space (4GB USB thumbdrive, obviously, could handle 2.5GB easily).

You can't use USB hard drives for ReadyBoost; they're fast in terms of top transfer speeds, but their random access times are too slow. Flash-RAM products are nearly instantaneous just like physical chip RAM is, thousands of times faster than even the fastest hard drive manufactured today.

Hope this helps...

I'm assuming you have done this yourself? What will the extra space of a larger card do? Allow more stuff to be cached?

I just bought a USB stick, but I'm planning to use that for my desktop. Since my new ultraportable laptop has a integrated card reader, I thought about using that instead. There is a deal for a 1GB SD card that has a 133x speed for $5 CAD after rebate and I thought about buying it to use it. You're sure that it will work though? I'm more than confident the card is fast enough for it, but I'm not sure if readyboost can work with a media card reader and a SD card.
 
Back
Top