Questions About Asus A8N-Sli

GooN3r

n00b
Joined
Dec 24, 2004
Messages
19
Hi all and merry Xmas

I have a few questions about the Asus A8N-Sli motherboard.


1. I have an Antec True Blue 480w PSU, will this be sufficient. I have read a lot of articles about the A8N needing a 24pin connection, is my PSU good enough?

2. I have also ordered 2x WD Raptors which I intend to setup in a RAID 0 array. Do I need a floppy drive to do this?

3. Which SATA controller is better, Silicon Image SATA controller or the nForce4 SLI’s built in SATA?
 
1.dont know too much about 24 pin connectors, so I cant realy help you here. I did however, find a 20 pin to 24 pin converter: http://www.stayonline.com/power_supply_cables/index.asp

2.You most certainly do need a floppy drive, as you will have to load the RAID drivers during windows installation, unless you slipstream the drivers onto the windows installation cd. (friend of mine did this, I can ask him how when we get back from christmas break)

3. Most people's experience with the Nforce 3's SATA controller is that its flaky at best. However, im not sure if Nvidia ironed out all of those issues with Nforce 4. It might serve you best to stick with the sure thing (Sillicon Image controller)
 
i coiuld never find the dl for slc on their site so whatever stock is running just fine for me, but i have via and not nforce

ive never heard of any problems with nforce's though


with that psu my system has never crashed or anything even with all the specs but someone said my rails are low or whatever that means so who knows. My old barton system on a diff psu would crash all the time but this one hasnt yet so i think it will be fine for u
 
Back
Top