Question regarding DFI Nforce II mobo

Brando457

[H]ard|Gawd
Joined
Aug 11, 2003
Messages
1,232
I'm planning on buying this motherboard

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=587819&CatId=0

and this CPU

http://www2.newegg.com/Product/Product.asp?Item=N82E16819103440

I wanted to know if that cpu/mobo combo would be able to handle HL2 and such I forget if it would.

I'm going to put my 6600GT in there and some corsair value select ram I think.

Any other cheap combos I should consider I don't wanna spend really over like 170$ for my mobo and cpu as I'm not going to be using my computer too much really anymore
 
Yes, that will play just fine even at stock speeds.

With my 2500+ sitting at its daily 2.2GHz, my 9800Pro (XT flashed), and a gig of Kingston valueram I was playing the game quite well. Visuals maxed and 1280x1024 still got me nice minimum 70fps. When I moved to some TCCD memory the 2-2-2 timings at 200MHz made the gameplay smoother, less choppy in some areas when the CPU has to actually think.

Low latency memory isn't very much more $ than value memory, and it can make a difference. Look into it at the very least and decide. HL2 will still play just fine with value memory.

Get that board and CPU. If the Egg has the DFI Infinity mobo in stock, get that instead and put the extra cash into memory. :)
 
No, there is a SocketA DFI Ultra NF2 Infinity. I didn't see it in the few American DFI retailers sites I checked, which is lame. Maybe they're just getting scarce in the US. The Lan Party board has more features.

I used to be running 1x512 PC2700 and 1x512 PC3200 at 2.5-3-3 and 200MHz. Both sticks were Kingston ValueRAM. The PC2700 had Samsung TCB3 chips or something, and did 2.5-3-3-11 up to the ~210MHz barrier my Asus had before the voltmod. The PC3200 was Elpida chips that couldn't do 201MHz if their lives depended on it.

Now I'm using some OCZ PC3200 EL Platinum Rev2 2x512 TCCD modules. I haven't done a 2-2-2 speed test to see how far they go since I did my north/southbridge voltmod. Good memory for taking A64's to 300MHz territory, but not great timings for the FSB speeds that SocketA can get up to.
 
ryuji said:
socket A in general is scarce nowdays
Yes they are. A semi-local shop has the DFI Infinity in stock, and I will be ordering one tonight/tomorrow. Kinda feels awkward to have killed an Asus though, and my 15A 12V rail might not be up to the challenge of powering the CPU. :(
 
Get that board but get this CPU

http://www2.newegg.com/Product/Product.asp?Item=N82E16819103401

I had that setup in 3 different computers all of them hit 2.5-6 ghz. awsome setup and It should handle HL2 if u have a nice video card.

I also highly recommend this ram:

http://www.atacom.com/program/ataco...EDD_OCZT_AG_C2+&Disp_item2.x=4&Disp_item2.y=7 ( i own 3 pairs now ) my current is doing 290 FSB @ 2-2-2-5 at 3.5v

With the money you just saved from getting this ram from not going corasir, get yourself a better video card.

:cool:
 
ha my gfx card is fine

Im kinda considering keeping my A64 3200+ and just get a different mobo and case
 
Back
Top