• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Question on this XP2500 on Ocing

J

jordan12

[H]F Junkie
Joined
Dec 29, 2000
Messages
11,052
Guys,

I have a friend that has an Asus A7n8X-E Deluxe. He has a standard desktop 2500+ with 2x512 of Corsair valueram. (It is PC3200)

What we are trying to do is simply get the CPU to run at 3200+ speeds.

If we set the ram at 200 mhz and the multiplier to 11, no video. If the ram is at 166x11, works fine.

What would you all suggest?
 
My a7n8x delux was a terrable overclocker. Increase your voltages a little. Whats the highest FSB you can do stable at 11x?
 
Well, I would say at first if you get no video to check and see if the agp is locked. But you said you get video if you run your memory at a 166 divider...

Check the memory voltage maybe? You may have to up it a bit. 2.8 volts is pretty common for ram to handle nicely if I remember correctly. A lot of ram I know stock voltage is around 2.8 but some motherboards will only give it 2.6 or 2.7 by default.
 
i would say get a new motherboard my a7n8x wouldnt hold 200fsb unless i had the volt mods applyed.
 
You must log in or register to reply here.
Back
Top