Question on circa 1995 board

Northern

Weaksauce
Joined
Aug 7, 2003
Messages
91
Ok friend of mine gave me this old AT&T Globalyst 375TPC which can also be identified as model 3348. My question is what form factor is this board. I've just recently got into reading about this stuff on this message board so sorry for the lack of knowledge tried doing a search and looks like it could be LPX (i think thats it) or AT or Baby AT. The dimensions are 9inches wide by 13 inches long. There are 6 slots of 4mb (what looks to be simms at the back of the length of the board) and the pcu slot is socket 5 Intel Pentium (opposite the memory slots near the back of the board). There is a chip on the board that says FBIOs 3248/3348 and Pheonix and AT&T 1994. The screws securing it the case were 4 and they were at the front and middle of the length of the board with the others being pins to hold the board in place at the back. Sorry for no pics not possible to do atm :(.

Any ideas of what form factor this is and if the case housing this could be transformed to atx?
 
bump :)
I know its rather vague but anyone have an idea of the form factor of that board? Any help is appreciated. Checked that site it was mostly newer form factors. Nothing I seen listed about the older stuff like this.
 
Yeah all are attached and the board needs a riser card as discussed in your link. Thanks guys. There is only one slot that a riser card goes into to provide the pci and expansion slots.
Thanks again for the help.
 
Back
Top