• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Question on an SSD and Raid 0 HDD's

J

jordan12

[H]F Junkie
Joined
Dec 29, 2000
Messages
11,057
I have two 500 gig drives in Raid 0 as my win boot drive.

I want to get one single SSD and reinstall win 7 and make that my boot drive.

But I want to leave my Raid 0 set up but not bootable. Want to use it as a simple storage drive.



Any issues with that?
 
baldrik said:
Nope. Just Set the BIOS to boot off the SSD instead of the raid array.
Click to expand...

+1 Its that simple.

Well set it to boot off the DVD drive to install Windows first, THEN set the SSD as second and then just disable any the 3rd boot device (or in the Hard Drive list, disable all but the SSD).
 
I'd recommend unhooking the hard drives while you do the install on the SSD, sometimes Windows will do screwy things if you have a Windows partition connected when you try to install to a different drive.
 
Forceman said:
I'd recommend unhooking the hard drives while you do the install on the SSD, sometimes Windows will do screwy things if you have a Windows partition connected when you try to install to a different drive.
Click to expand...

Definitely.
But if it's on the same controller and you want TRIM, you may have to enable AHCI mode instead of RAID mode for the controller. In that case you lose your RAID functionality.
 
You must log in or register to reply here.
Back
Top