question for the group...

ddt01940

n00b
Joined
Nov 15, 2010
Messages
27
Hi Guys,

I intend to build my first system.

Because the year is coming to a close I have to spend my budget ( i have my own business ) before 2012 arrives. So, the more components I'm able to select and buy before the year is out the more money I'll save. It'll be capital equipment because it's for my work.

I'm looking at the EVGA SR-2 mobo,dual xeon's for it, etc.

Here is my question:

How difficult is it to build a system such as this?

Is me, being a noob and diving into a build such as this, a dumb idea?

Or could a noob pull this off pretty much no sweat. I do have a lot of past experience fixing circuit boards, pulling apart systems, swapping out power supplies, etc., but have never built a system on my own, or with anyone else.

It doesn't seem like it would be rocket science, or am I missing something?

I don't know how much documentation is available, manuals, etc.

It won't be cheap. The CPU's alone cost close to 3k, so I just want to make sure I'm not doing anything dumb before I pull the trigger and buy all this stuff.

Thanks for any help.

DT.
 
It is not that hard. Answer the sticky questions in the general hardware forum and post there, that way you can get the proper help for what you need.
 
I always recommend that people learn to put together their own boxes ... however, I normally do that with the caveat that they start out small and preferably cheap, so if something goes wrong they wont be too out of pocket.

It seems like you are thinking of a big $$$ build and that is where the risky / bravery question comes into mind. If you slip or if you short out something worth $$$ how are you going to be /. feel?

Seasoned pc builders make common mistakes (forget to plug this or that) in all the time, not to mention the trouble shooting once everything is "put" together but for some reason still refuses to boot.

Definitely do it for the learning experience but I would not start job #1 with a server that is going to cost big $$$!
 
Last edited:
might I suggest a test build before throwing 10k at an SR2? build a llano PC, make it some sort of HTPC once you go for the higher end boards for your main system. You can also buy some of the more durable items at this time like the PSU and full version of the Win 7 OS (for multiple installs). I am looking at a system right now with an AMD A8-3850 for a whole $500.

You can even practice an overclocking on a cheap little llano chip, they do not overclock well but all you have to loose is a $100 chip.
 
A couple thoughts:

(1) IMHO there's not really much you can do wrong when building your own PC, provided that you have purchased the correct parts. I cannot guarantee that you wouldn't find new ways I didn't think of, though :)

(2) to make sure you're doing it right when building your own PC, you may want to google the words "building your own PC"

(3) if you're still not sure, you can buy a pre-assembled computer from Supermicro. They call these SuperWorkstation or SuperServer, depending on the product, providing excellent value for money, in particular when you compare them to brand name computers from, say, HP or Dell. These products merely require that you install (a) CPU(s), (b) RAM, (c) harddisks, (d) optical drives, and (e) the graphics card(s) yourself.

Note that you can save a non-trivial amount of money if you (f) insert the mainboard into the case and connect the cables, since that's the only thing you don't need to do yourself when you purchase a SuperWorksation or SuperServer.

(4) in spite of all this, right now (i.e., November 2011) seems to be a very bad time to build a Xeon-based computer. This is because (a) hard drives will cost you an arm and a leg due to the flood in Thailand, and (b) newer, better Xeon processor are due to be released in the first months of 2012. Personally, I would not put purchase an intel based system at this time, but wait a few months.

Don't you need one or several 30" screens or something? How much money do you need to spend?
 
Agreed.........pick a smaller task.

That evga board is way more than you'll need.

Also look at jncs.com, those guys sell,support and design personel and business barebones systems, that would be much like the SuperMicro mentioned above.
 
@meatling:
Thanks for the advice.
I would like to buy 1 or 2 30" monitors. Can you recommend any? I'm going to buy at least a new IMac and other assorted apple equipment, including at least 1 thunderbolt interfaced 27" monitor ( $999.00 ). Who makes real nice 30" monitors? Thunderbolt interface can use adapters, TB to HDMI, etc. I would also want at least one 30" for the windows box.
I'll probably spend between 6-9k on equipment. I figured I'd upgrade my windows platform while I'm at it. That's why I'm interested in building my own on that front. All the apple stuff is off the shelf, obviously. I want to update everything while I have the dough that can be expensed via cap equipment, etc.
@magoo:
Thanks for the advice and the link. Ill check them out.
Thanks again everyone for the advice. I will research all of it.
 
Who makes real nice 30" monitors?

It does depend on what you mean with "real nice", but either way I think both Eizo and NEC are considered top drawer.

I'll probably spend between 6-9k on equipment.

Which means you cannot sensibly annihilate all your excess dough by spending it on 30" monitors alone.

Decisions, decisions ... :)

Speaking of which, have a look at this:

http://www.trinitygroup.ru/events/pks.pdf

The X9DRxxxx boards shown in that document aren't released yet, and these were the reason I said I would wait. YMMV.
 
Back
Top