Question about Nforce 3 250

[BB] Rick James

[H]ard Dawg
Joined
Apr 4, 2004
Messages
2,810
Will there be more head room for overclocking with the newer 250 boards over the current boards on the market? I have the Gigabyte K8VT800 board (Via) and I really can't o/c for crap.

I'm wondering what your thoughts are on the new boards hitting the market soon?
 
That depends on whether your overclocking efforts are limited by your processor or by the chipset PCI/AGP frequencies running out of spec.

The NForce3 250 looks like it has the ability to lock the PCI/AGP bus frequency, which should mean additional overclocking headroom for the chipset and any motherboard that implements it well.
If your processor is what is limiting your current overclocking then the new chipset won't do anything for you.
 
It is supposed too, and the reference board did, but unfortuanately the bios implementation on many boards precludes this, an exception is the AN50R. Nv said that they are working closely with board makers on the 250 to make sure that this works properly on all nf3 250 based boards.
 
The AN50R may have the ability to lock the AGP bus, but not the PCI bus.
Everyone who has measured says the PCI bus definitely is not locked.

The NF3 250 may remedy this issue by adding an additional crystal to run the PCI/AGP busses completely independently from the chipset clock generator.
 
I read that the reference nf3 150 board locked both buses. Nvidia blamed the problem in retail boards on bios implementation.
 
I read that the reference nf3 150 board locked both buses. Nvidia blamed the problem in retail boards on bios implementation.

Could be true, could be lies.
The AN50 is not PCI locked regardless of what nvidia csays.
 
Back
Top