Question about dead Bios Flash

diredesire

Supreme [H]ardness
Joined
Feb 18, 2003
Messages
4,516
Hey guys, recently bought a motherboard that supposedly has a dead bios chip. I have plenty of older motherboards in the garage w/ socketed bios chips, so i obviously had the genius idea of flashing one of them to the bios i need, and then popping the chip into the 'dead' board. Now, i just need a confirmation that this will work before ruining an old, but working board. If i booted and flashed the bios to a totally different (chipset different, processor different, etc etc) version, would i be able to just transfer the chip over to the newer board and call it good? I'm just looking for someone to confirm this for me, but i'll probably end up trying it anyways. Thanks for any help you can provide me guys ;)

(another thing i'm wondering about, is if the size of an older bios chip is enough for a newer bios?)
 
Ive done this multiple times. My old ECS k5something was shitty as hell, and couldn't even do its own bios updates without corrupting it.

You can do the BIOS update onto the existing corrupted BIOS chip, assuming the chip is a similar type (they are generic, but some still have different pin counts).


heres what I did, starting with the working computer:
enable BIOS caching in the cmos if it isnt already
Start up your working mobo to the dos prompt
remove existing bios chip
install the "busted" one from the other mobo
force-flash the bios onto the chip. This varies greatly and im not sure what the commands are, but the program to do it (from the dos prompt, remember) is available from numerous vendors websites.
 
Thanks for the reply, methodical! Damn, the mainboards folder moves SLOW :p

I'll try it and see what happens >:D
 
Back
Top