Question about bent cpu pin

XBOXisBEST

n00b
Joined
Oct 25, 2009
Messages
38
Hello, everyone,

I just bought a motherboard and there seem to be a bent pin on the CPU socket. I wanted to know if this will work or will it need repair (should I send it back?). Thanks for your help.

cpu_pin.png
 
Return it and get another one. No sense in trying to keep something that is not right immediately out of the box.
 
Lol, yeah it probably won't work. If it does it can cause random problems, instability, burn the chip, etc, etc - you can try to put it back but it'll be tough. Looks like you found why he sold it dirt cheap.
 
Bend it back. If its not broken off, it ought to work.
Haven't any of you guys ever bent pins before (esp in the old days?)
 
Bend it back. If its not broken off, it ought to work.
Haven't any of you guys ever bent pins before (esp in the old days?)

Bending an actual pin on an old processor is a lot different than the 'pins' on a 1366. Don't get me wrong, I would try it if I thought I could do it.
Here's a thread on bending them back http://hardforum.com/showthread.php?t=1418751 talking about techniques.
 
Last edited:
if it was an amd issue this would be an easy fix, but intels are a bit more trickey

i would just exchange the board for another one
 
A lot of companies will not take back motherboards with bent pins, saying it is a customer caused issue. You can try getting a mechanical lead pencil, pushing it over the pin and straightening it that way. A lot of risk though. Most likely it is a extra ground pin and not critical, but no assurance of that.
 
If Intel made the tech docs for s775 like they did for s1366 then you can just go download the docs from them, find the diagram of what the rows/colums are for the pins, cross reference it with the pins list and see if it is a critical pin or not.

Surprisingly, even s1366 has a whole lot of reserved(unused) pins even when used on a server board.
 
Hey guys, thanks a lot for the help. I managed to bend it back with a cutting knife :), now to see if it works.

here is the pic

P6210141.jpg
 
I also bought a 775 board from someone and it was poorly packed. Arrived with about 10 badly bent pins. I used a stereoscope at my work with a small thin flathead screwdriver and an xactoknife to reshape the pins back. It worked wonders for me. The pins are surprisingly strong so a little bit of strength is ok if necessary to bent them back. One thing to keep in mind is you wanna make sure the pins don't deviate out of their position when you simulate a CPU pushing down on the socket. The contact is more important than perfecting the shape of the pins.
 
ok, after bending them back I realized that there was no VGA port :eek: then i bought an 7800gt and tried it and it doesn't work.

It gives me a red light under the CPU fan header. So do you guys have any idea how to fix this?, its a 780i SLI motherboard. Please let me know,
 
I had a Rampage II Extreme from Asus and I noticed when I received the board new and unopened and after having problems related to voltage and memory (after 3 months of use I RMA'd it) I recived a second board and noted this same thing - in that same spot a pin was not only bent but was actually attached to the pin next to it making it look "bent" but because of what on closer inspection looked like a light weld I left it alone.

The board was delivered in an un-opened box both times (on origional purchase and on RMA) and worked fine for over a year and I recently sold it without the cpu to someone else (only to upgrade to a Rampage III Extreme where I note there is no "bent" pin) and the person who purchased it ust loves it - said it was working just fine and the person who purchased the cpu said it was working well also.

Just thoought to add my two cents as you have not listed the board maker and this looks almost exactly where the pin on my board was or seemed to be "bent". Maybe there is some reason behind it? Like a jumper or bridged connection? From your firat picture it looks like might be what I encountered or it is actually bent out of place.


Something to think about since you are still having some trouble with it.

Since, from looking at the pics you posted it looks perfect, you can still RMA it - I would go that route.
 
Last edited:
OK guys, Thanks for all the help and replies. I got it working now just removed the battery and put it back on everything is good as new!.
 
yeah, a few bent pins is nothing, you can always carefylly realign them..now if they break off, that's a whole other problem
 
I recently bought a Phenom 955 that came with a few bent pins. I bent them back carefully, only to find out that there was a pin completely broken off in addition to the bent ones. I'm guessing the guy who sold it to me tried to bend that pin back but wasn't careful enough.

One does need to be careful bending these, but with some patience and precision, it's doable in most cases.
 
Folks, this is why you ship with the little piece of plastic covering the CPU socket.

OP: VERY CAREFULLY take a knife and bend it back, to match the way the other pins are. The gold coating might come off, but that's OK, it'll still work. Just make sure it lines up as perfectly as possible with the other ones. Whatever you do, don't break it.

Fixed this once on an old board of mine, never had any trouble with it.
 
AVT, the OP posted further in the thread that he already did what you just recommended. :)
 
...push...push...push...check...***COUGH***...!!!HOLY SHIT!!!...***!!!WTF!!!***..***!!!DAMNIT!!!!****
 
Back
Top