Question about abit IC7-Max3

RancidWAnnaRIot

EspantaPajaros
Joined
Feb 19, 2004
Messages
11,033
OK this is the first time i will build a box with a SATA harddrive.. my questions is .. does the motherboard bring the drivers nesseary for SATA?

Is this the correct way to install a SATA drive and then install windows on it

1) pop in XP Cd.. press F6

2) pop in SATA driver floppy (i believe it comes with the board)

3)press S and install drivers.

after that the install utility on Xp should see the drive and procede with partitioning and format...

Is this the correct way to do it?
Or am i missing something?
 
Yea it sounds like you got it down. How ever first thing is get into the BIOS and either configure the OnChip (Intel) SATA controller or the PCI based SATA controller. If they are not enabled, the Windows install may not see them at all.

Also set the boot order if you choose to boot off the SATA drive
 
Tried to reply yesterday and didn't work. Yes the way you describe it is how it is done. Don't forget to set the boot order first in the bios.
 
Back
Top