Q6600 Multiplier help.

A

AMDXP

2[H]4U
Joined
Jul 9, 2004
Messages
2,631
overclockfd2.jpg



I disabled EIST or atleast I thought I did?

Set multiplier to 9.

Any thoughts? This is my first build and real overclock.

:confused:
 
Did you set the muliplier to 6 yourself, or if that your Board auto doing it?

What specifically is your problem other than that? You really didn't say much in your post.

Oh, I see, set your FSB TO RAM, 1 to 1. That is make your RAM speed twice the [Value] X 9
For example.
Set your CPU back to stock Speeds.
thats is [266]X9
So your memory will be running at [266] x 2
 
turn off c1e halt state and turn off spread spectrum, disable execute disable bit, disable speedstep. Set multi manually to 9x.
 
EquaLiZr said:
turn off c1e halt state and turn off spread spectrum, disable execute disable bit, disable speedstep. Set multi manually to 9x.
Click to expand...

Thank you! I will try that!

*Edit It worked. Thanks Equalizr!
 
Blueagle87 said:
Did you set the muliplier to 6 yourself, or if that your Board auto doing it?

What specifically is your problem other than that? You really didn't say much in your post.

Oh, I see, set your FSB TO RAM, 1 to 1. That is make your RAM speed twice the [Value] X 9
For example.
Set your CPU back to stock Speeds.
thats is [266]X9
So your memory will be running at [266] x 2
Click to expand...


HUH?.......not even close...:)
 
Up to 2.8 Ghz and Stable with no voltage increase. I think I'll leave it here for now.

:D
 
Crosshairs said:
HUH?.......not even close...:)
Click to expand...

Your not close if you did not notice the 2:3 ratio for his Ram.

The only part I was wrong about, was assumming that he already disabled those CMOS settings.
Not to mention that fact that I, and then you, missed those horrid timming.
Should start at 5-5-5-15, then goto 4-4-4-12 after final clock is reached. (Only if stable of course)
 
Seems stable, will try 3.0 later.. want to check temps!

Anyone know of a good program to do so?
 
Coretemp 0.95.4

The newest one.
Btw, you want to set your timmings to 5-5-5-15, and only set them to 4-4-4-12 after you have found the max stable overclock.
 
Blueagle87 said:
Coretemp 0.95.4

The newest one.
Btw, you want to set your timmings to 5-5-5-15, and only set them to 4-4-4-12 after you have found the max stable overclock.
Click to expand...

kk Sandra shows it running at 24-27*C Idle and Speed fan shows 28-29*C


Core Temps seems more correct 39*C after playing some COH at max settings.

Is that decent?
 
Blueagle87 said:
Your not close if you did not notice the 2:3 ratio for his Ram.

The only part I was wrong about, was assumming that he already disabled those CMOS settings.
Not to mention that fact that I, and then you, missed those horrid timming.
Should start at 5-5-5-15, then goto 4-4-4-12 after final clock is reached. (Only if stable of course)
Click to expand...

I just assumed he was running his ram unlinked......
I run my ram @ 400 but my FSB @ 300...

so my divider shows 3/4

but yeah, those timings need to go..:)
 
Crosshairs said:
I just assumed he was running his ram unlinked......
I run my ram @ 400 but my FSB @ 300...

so my divider shows 3/4

but yeah, those timings need to go..:)
Click to expand...

Once stable, I made a new thread about where I am at with clearer pics.

;)
 
You must log in or register to reply here.
Back
Top