iolair
Limp Gawd
- Joined
- Oct 27, 2001
- Messages
- 141
I have yet another ASUS Maximus IX Apex......I have since moved on to Z390, but I still had good components with the Apex and I wanted to build it as a spare.
Soon as I got it, I installed all of the old components and of course it would not boot.....returning error code 0E. I tried everything, cleared the BIOS, reflashed etc......I thought maybe the delidded CPU finally had given up.
The motherboard came with the latest BIOS 1301. So, I tried one last idea.....I reflashed the BIOS to 0801, the one that was in it when the original board died.
It booted right up.....quite a relief. I then hit the BIOS switch and tried 1301 again.....it booted a couple of times and then 1301 was ok....everything was working correctly.
So, anyone have an explanation? I assume the CPU had the 0801 microcode installed in its flash memory, but do not know why it would not except the 1301 right off the bat.
Soon as I got it, I installed all of the old components and of course it would not boot.....returning error code 0E. I tried everything, cleared the BIOS, reflashed etc......I thought maybe the delidded CPU finally had given up.
The motherboard came with the latest BIOS 1301. So, I tried one last idea.....I reflashed the BIOS to 0801, the one that was in it when the original board died.
It booted right up.....quite a relief. I then hit the BIOS switch and tried 1301 again.....it booted a couple of times and then 1301 was ok....everything was working correctly.
So, anyone have an explanation? I assume the CPU had the 0801 microcode installed in its flash memory, but do not know why it would not except the 1301 right off the bat.