• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

Q about about AWC-1

C

Cryptic

Gawd
Joined
Aug 22, 2004
Messages
836
On my display for my Kingwin AWC-1 Water kit the pump illistration runs for about 5 secs, then stops for 1 or 2 then starts again. The manual says the picture only stops when the pump stops, but it seems odd to me that it stops every couple seconds. I was wondering if anyone who has this kit has the same thing happen or if its just me? Thanks.

Edit: on the same note the picutre for the fan stops moving and starts again at the same time as the pump picture, but I know the fan isnt stoping as I can hear it...so I'm assuming/hoping its just a glitch, correct?
 
If the pump and rad fan motors are fine then don't worry about it. It's not exactly a "high-end" device so don't expect too much from the interface.
 
Don't worry about the display, both of these devices have a buzzer hardwired into the power line (I've dissected mine :D) and if either of these fail, you'll get a very loud, very high pitched noise telling you soemthings not right.
 
yeah if something isn't right it will make that loud annoying bEEEeeeEEeeepppp....what kind of temps do you get with your kit my temps are in my sig..
 
I'm getting about 36c idle and 44c load...which is a huge improvment over what they were before...so I'm happy with it. Thanks for all the feedback.
 
Cryptic said:
I'm getting about 36c idle and 44c load...which is a huge improvment over what they were before...so I'm happy with it. Thanks for all the feedback.
Click to expand...

Like I mentioned in another thread, just watch out for leaks and cracks in the resovoir, especially around the fill hole.
 
You must log in or register to reply here.
Back
Top