PWM IC temps

lemmy

Limp Gawd
Joined
Oct 23, 2004
Messages
460
hi when i'm overclocking both cores on my opteron 170, my PWM IC temps rise to about 55-56c at around 2.8ghz, is the pwm ic temps safe to OC at that temp?
 
it's a bit high, but not in the danger zone... though if it's that hot, your ram probably doesn't have much airflow either. put a fan over the entire area.
 
you're certainly not going to hurt the MOSFETs at those temps.
The issue when you get to overclocking is you need to derate those MOSFETs as their operating temperature increases. You get most if not all the rated Id up until 35-40C on most parts, but when you start getting Tj up around 125C you're only getting at most half the rated power. Of course the faster you run your chip and the more voltage you give it, the more current it needs from the PWM.
 
before i had it at 59c, but i went out and bought some heatsinks, for the pwmic heatsink. Stuck about 3 of them on there and lowered my temps by 7C. yes i was amazed as well. now i idle at 52-54C
 
Mine idles around 48-50C, and it gets up to 60C while I'm playing, but that's it.

that's with 1.65vcore through my 3700+ and 1 exhaust fan at the top of my case and an intake in the front both 80mm silent. :)
 
Back
Top